Nusitae Tamping Rammer Mɔ̃wo Wɔa Dɔ Wu Anyigba ƒe Nutete Kple Asi

• Asi ƒe nutete sɔ na akpa suesuesuewo, gake ƒã hafi wònyea tiatia nyuitɔ kekeake na kpekpeme si dzi wokpɔna.
• Tamping rammer wɔa dɔ nyuie wu le dowo, megbekɔkɔƒewo, kple edge compaction afisi plate ƒe gege ɖe eme seɖoƒe li na.
• Compaction quality le vevie elabena density si mesɔ o dzia afɔku si le settlement, ƒunukpeƒewo ƒe gbagbã, kple etsɔme dzadzraɖo ƒe gazazã ɖe edzi.
• Ele be woanɔ te ɖe anyigba ƒe ƒomevi, ʋufɔti ƒe titrime, kekeme si dzi woato age ɖe eme, kple taɖodzinu si dzi woato aƒoe nu tiatia dzi, ke menye ɖe numame dzi o.
• Le kontraktɔawo gome la, menye duƒuƒu koe viɖe vevitɔ le o, ke boŋ alesi woate ŋu agbugbɔe awɔe kple dɔwɔwɔ ake si bɔbɔ ɖe anyi wu.

Wosea tamping rammer ƒe dɔwɔwɔ gɔme nyuie wu to compaction control me, ke menye mɔ̃ ƒe lolome ɖeɖeko o, elabena zi geɖe la, woɖea anyigba ƒe kpekpeme ƒe taɖodzinuwo gɔme to dzidzenuwo abe ASTM D698 kple ASTM D1557 dzi, siwo gblɔa nudokpɔƒe ƒe compaction mɔnu siwo wozãna tsɔ dea dzesi agbledɔwo. Le agbledeƒe ƒe nya ŋutɔŋutɔwo nu la, zi geɖe la, mɔ̃ si ate ŋu aƒoe ɣesiaɣi le teƒe siwo xaxa la ƒoa asi ƒe nutete le eƒe nyonyome kple dɔwɔlawo ƒe dɔwɔwɔ nyuie siaa dzi. Ne èle nu tsɔm sɔ kple wo nɔewo tamping rammer ƒe ƒuƒoƒo zãe kple asiƒoƒo, kpɔ alesi wòsɔ ɖe enu hã plate compactors ƒe mɔ̃wo na nuto gbadzawo kple kɔnkrit-tsolawo na afɔtoƒewo dzadzraɖo ƒe dɔwɔwɔ siwo do ƒome kplii. Nyabiase vevitɔa menye nenye be asi ate ŋu aƒoe o, ke boŋ nenye be ate ŋu aɖo kpekpeme si hiã gbɔ kakaɖedzitɔe ɣeyiɣi si gbɔ eme, ɖeɖiteameŋu, kple masɔmasɔ manɔmee.

Nusita Tamping Rammer Ƒo Asi ƒe Nutete Le Dɔwɔƒe ƒe Nɔnɔme Nyateƒetɔwo Me

Tamping rammer ɖua dzi elabena woate ŋu aɖu impact compaction dzi wu asi ƒe ŋusẽ, vevietɔ ne dɔwɔƒea le kpuie alo ele be woatu nusi wotsɔ yɔe ɖe ʋufɔti tsɛwo me. Asi ƒe nutete nɔ te ɖe dɔwɔla ƒe ŋusẽ, ɣeyiɣi ƒe didime, kple dzidodo dzi vevie, si wɔnɛ be emetsonuwo toa vovo le dɔwɔlawo kple dɔ ɖeka ma ke me. Rammer ɖoa ŋusẽ si wotsɔna yia anyigba me la ɖe ɖoɖo nu, ale be ʋua me dɔwɔlawo ate ŋu alé fɔ ɖe teƒe si woatsɔe aɖo, tsidzadza dzi ɖuɖu, kple akɔta ƒe titrime ŋu tsɔ wu be woadze agbagba axe fe ɖe asiƒoƒo si mesɔ o ta.

Viɖe sia va dzena gaglãa wu le do siwo me wozãa nuzazãwo le, le mɔdodowo dzi, kple le gɔmeɖoanyiwo to. Menye ŋusẽ si bɔbɔ ɖe anyi koe nye kuxi si le asi ƒe nutete ŋu o; enye ŋutete manɔamesi be woalé ŋusẽ ma me ɖe asi le ɣeyiɣi si me wowɔa dɔ bliboe me hã. Ðeɖiteameŋu trɔa nusi dona tso eme, eye zi geɖe la, teƒe falɛfalɛwo dzena le afisi dɔwɔla la mete ŋu ɖoa ƒoƒoa gbɔ alo gbugbɔa ƒoƒo wòsɔ gbɔ o. To vovo na ema la, wotrɔ asi le tamping rammer ŋu ​​be wòate ŋu aƒoe enuenu le ɣeyiɣi sesẽ me, si wɔe be wòsɔ nyuie wu be woatsɔ aƒo anyigba siwo wɔ ɖeka kple esiwo ƒe akpa aɖe wɔ ɖeka la nu ƒu ɖe teƒe siwo woxe.

Tabla si le etame la ɖe se vevi siwo kontraktɔawo zãna le teƒea fia: tia dɔwɔnu si sɔ kple anyigba ƒe nɔnɔme kple anyigba ƒe nɔnɔme. Tamping rammer menye xexeame katã ƒe nusi woatsɔ aɖɔli compaction dɔwɔnuwo katã o, gake kakaɖedzi le eŋu wu asi mɔnuwo ne mɔɖeɖe ɖe nu ŋu le kpuie eye eƒe nyonyome ƒe nudidiwo sesẽ ko. Le broad pavement prep gome la, ʋua me dɔwɔla geɖe trɔna yia a plate compactor ƒe mɔ̃ , emegbe nàzã rammer na do ƒe gowo kple utility cut zones.

Tamping Rammer vs Manual Compaction: Nusi Xexlẽdzesiwo Fia

Wodzidzea nutete ƒe nyonyome to eƒe kpekpeme, tsi ƒe nɔnɔme, kple alesi wòwɔa nu ɖekae dzi, eye esesẽna be woaɖo kpe emetsonu mawo dzi kple asidɔwɔnuwo ɖeɖeko. Standard Proctor dodokpɔ le ASTM D698 te kple Modified Proctor dodokpɔ le ASTM D1557 te gakpɔtɔ nye dzidzenu siwo bɔ hena agblemenuku ƒe dɔwɔwɔ tsɔtsɔ sɔ kple wo nɔewo. Wozãa ASTM D698 na agbagbadzedze ƒe mɔnu si wozãna ɖaa, gake ASTM D1557 ya zãa agbagbadzedze si kɔ wu le nutete me eye woƒoa nu tso eŋu zi geɖe na dɔwɔwɔ siwo kpekpe wu. Le agblea dzi la, zi geɖe la, kontraktɔwo ƒe taɖodzinue nye be yewoaxɔ nudokpɔƒea ƒe kuɖiɖi ƒe agbɔsɔsɔme si sɔ gbɔ wu ƒe alafa memamã ɖeka tsɔ wu be yewoaɖo ŋu ɖe nukpɔkpɔ ƒe ʋɔnudɔdrɔ̃ ŋu.

Emae nye gbɔdzɔgbɔdzɔ vevitɔ si le asi ƒe nutete ŋu: nyaŋuɖoɖo ƒe mɔnu aɖeke mele dɔwɔla la si tẽ o. Àte ŋu ase le ɖokuiwò me be anyigba la sesẽ, gake ne womeɖo kpe eƒe kpekpeme dzi o la, emetsonua ate ŋu anɔ anyi kokoko. Le nuzazãwo gbugbɔgaɖoanyi me la, zi geɖe la, woƒe ƒoƒo ɖe wo nɔewo ŋu nyuie o la dzena emegbe abe alesi wova nɔ anyi, woƒe gbagbã, alo teƒe si te ɖe anyi le tsidzadza kple ʋuwo ƒe agbawo megbe ene. Tamping rammer ɖea afɔku ma dzi kpɔtɔna to alesi wònana woate ŋu agblɔ alesi woawɔe ɖi nyuie wu tso ʋufɔfɔ dzi yi bubu dzi me.

United States Dukɔa ƒe Mɔdodo Gãwo Dzikpɔƒe gblɔ be mɔdodo gãwo ƒe ʋuʋu si mesɔ o nye nusi gbɔ wòtsona zi geɖe be mɔdodowo kple dowo me nɔnɔ ƒe kuxiwo doa mo ɖa, si tae agbledzikpɔkpɔ le vevie abe mɔ̃ tiatia ene. Àte ŋu ato FHWA ƒe mɔfiame siwo ku ɖe mɔdodowo kple anyigba ƒe dɔwɔwɔ ŋu me to FHWA anyigbaŋutinunya ƒe agblemenukuwo wɔwɔ ƒe nuzazãwo . Le kontraktɔawo gome la, nusɔsrɔ̃ ŋutɔŋutɔ si le eme la le bɔbɔe: asixɔxɔ le tamping rammer ŋu ​​elabena ekpena ɖe ame ŋu wòtrɔa dɔ si wowɔna le susu me wòzua nusi woate ŋu agbugbɔ awɔ.

Afisi Anyigba ƒe Ƒoƒu Kple Asi Gaɖea Susu Le

Teƒe gakpɔtɔ le asi ƒe nutete ŋu ne teƒe si wodzraa nu ɖo le sue, gege ɖe eme mebɔ o, alo dɔwɔnuwo zazã mawɔ dɔ nyuie o. Le kpɔɖeŋu me, ɖewohĩ teƒe sue aɖe si wotsɔ ƒo xlã pɔmpi ƒe ʋufɔti, tame si me goglo ŋutɔ, alo asikaka eŋu mlɔeba le nugbɔ si le tsɛ aɖe gbɔ la masɔ be woatsɔ dɔwɔnu siwo ŋu ŋusẽ le vɛ o. Le nɔnɔme mawo me la, menye taɖodzinuae nye be woawɔ dɔ geɖe wu o ke boŋ ɖɔɖɔɖo le teƒe ɖeka.

Gake dzidzenu si dzi asi ƒe nutete megawɔa dɔ o la va ɖona kabakaba wu alesi ʋua me dɔwɔla geɖe kpɔ mɔe. Ne tsi si wotsɔ yɔe ƒe goglome tsi, doa didi wu, alo dɔa dze ʋuwo ƒe agbawo tsɔtsɔ gɔme ko la, asiƒoƒo va zua dɔwɔlawo ƒe mɔxenu. Menye ŋgɔyiyi blewu koe afɔkua le o; enye kpekpeme si mewɔ ɖeka o hã le nuwo ɖɔɖɔɖo ƒe afɔtoƒea katã dzi. Esia tae kontraktɔ geɖe dzraa asidɔwo ɖo hena teƒea ɖɔɖɔɖo eye wozãa tamping rammer hena compaction cycle ŋutɔŋutɔ.

• Zã asi ƒe nutete na asikaka nu sue ŋutɔ siwo me afɔku mele o ko.
• Trɔ ɖe tamping rammer ŋu ​​ne teƒea le kpuie, goglo, alo agba ate ŋu atsɔe.
• Zã plate compactor le granular anyigba siwo le ʋuʋu ɖi dzi le afisiwo nutsyɔtsyɔ le vevie wu be woaƒoe.
• Kpɔ density ɖa ɣesiaɣi si dɔa akpɔ ŋusẽ ɖe afɔtoƒe, kpe gbadzɛwo, alo mɔnu si dzi woato age ɖe elektrikŋusẽnamɔ̃wo dzi le etsɔme dzi.

Ne wò dɔwɔwɔ hã lɔ teƒea dzadzraɖo kple anyigba dzi dzadzraɖo ɖe eme la, pairing compaction with mixers na nusiwo wodzra ɖo kple anyigba ƒe nutunu siwo wotsɔna ƒoa nu elabena nuwuwu ɖɔɖɔɖo ate ŋu aɖe dɔmawɔmawɔ ƒe ɣeyiɣi si le afɔɖeɖewo dome dzi akpɔtɔ. Nya lae nye be woatsɔ dɔwɔnuwo asɔ kple dɔwɔwɔ ƒe ɖoɖo bliboa, ke menye ɣeyiɣi si woatsɔ aƒo wo nu ƒui ɖeɖeko o.

Anyigba ƒe Ƒomevi, Lift ƒe Titrime, Kple Nusita Rammer ƒe Dɔwɔwɔ Trɔna

Anyigba ƒe nuwɔna trɔa ŋuɖoɖoa wu alesi gɔmedzela geɖe kpɔnɛ dzea sii. Anyigba siwo wɔ ɖeka abe silty clay alo clayey fill ene wɔa nu nyuie wu ne impact compaction elabena rammer ƒe ƒoƒo enuenu kpena ɖe ame ŋu wògbugbɔa nu suesuesuewo ɖoa ɖoɖo nu eye wòdoa ya ɖa. Zi geɖe la, anyigba siwo me ʋuʋudedi le siwo me tsi sina tona faa la kpɔa viɖe geɖe wu tso dɔwɔnu siwo wotu ɖe ʋuʋudedi dzi me, vevietɔ le teƒe siwo keke wu. Esia tae tamping rammer ate ŋu awɔ dɔ nyuie wu asi ƒe nutete ŋutɔ le trench backfill me gake megawɔa dɔ nyuie wu plate si le sand base dzi o.

Susu ma ke tae lift ƒe titrime le vevie ɖo. Ne ƒuƒoƒoa lolo akpa la, asiƒoƒo alo mɔ̃ sue aɖeke mate ŋu aƒo goglome bliboa nu ƒu nyuie o. Gbeadzinuwɔna nyui aɖee nye be nàde ʋufɔti siwo dzi woate ŋu aɖu la me eye nàƒo ʋufɔti ɖesiaɖe nu ƒu hafi nàtsɔ esi kplɔe ɖo akpe ɖe eŋu. Afi siae ame si trɔa asi le nu ŋu ɖoa kpe asixɔxɔ si le eŋu dzi le: ekpena ɖe ʋua me dɔwɔlawo ŋu be woalé ʋufɔti tsɛ siwo dzi woate ŋu aɖu ƒe amehehe me ɖe asi tsɔ wu be woadze agbagba azi ʋua ƒe kpekpeme dzi wòazu ƒuƒoƒo si lolo akpa.

Tsi ƒe agbɔsɔsɔ nye tɔtrɔ vevi bubu. ASTM D1557 kple agbledeƒe ƒe ɖoɖo siwo do ƒome kplii ɖoa ŋku edzi na kontraktɔawo be viɖe si woakpɔ tso anyigba ƒe ʋeʋẽ me nɔ te ɖe anyigba ƒe tete ɖe eƒe tsidzadza ƒe nɔnɔme nyuitɔ ŋu dzi. Eƒu akpa eye nusueawo tsi tre ɖe gbugbɔgaɖoɖo ŋu; tsi akpa eye anyigbaa ƒe ʋeʋẽ va sesẽna. Tamping rammer mate ŋu aɖɔ tsidzadza dzi ɖuɖu gbegblẽ ɖo o, gake ate ŋu ana tsidzadza dzi ɖuɖu nyuie nawɔ dɔ nyuie wu.

Dɔwɔƒea ƒe Dɔwɔwɔ Nyuie: Dɔwɔwɔ, Dɔwɔwɔ Gbugbɔgawɔ, Kple Dedienɔnɔ

Zi geɖe la, tamping rammer ɖea dɔ ƒe gazazã bliboa dzi kpɔtɔna elabena eɖea dɔwɔlawo ƒe gaƒoƒo dzi kpɔtɔna eye wòɖea mɔnukpɔkpɔ si li be woagbugbɔ kaƒoƒo na wo dzi akpɔtɔ. Asi ƒe nutete dzena abe ɖe mexɔ asi o ene le gɔmedzedzea me elabena ezãa asidɔwɔwɔ, gake ga si woɣla la dzena le ewɔwɔ blewu, ɖeɖiteameŋu geɖe wu, kple emetsonu siwo mewɔ ɖeka o siwo ate ŋu ahiã be woagbugbɔ awɔ dɔ le wo ŋu me. Le kontraktɔ ƒe ganyawo me la, zi geɖe la, gbugbɔgawɔ xɔa asi wu dɔ gbãtɔ elabena egblẽa nu le ɖoɖowɔwɔ ɖe wo nɔewo yome ŋu eye wòhea asitsatsa si kplɔe ɖo ɖe megbe.

Dedienɔnɔ hã le vevie. Asi ƒoƒo dea nɔnɔme siwo mebɔ o, ʋuʋu enuenu, kple agbagbadzedze fũu akpa ƒe dzi ƒo, vevietɔ ne dɔwɔlawo le ƒoƒom ɣeyiɣi didi le dowo me alo le goawo gbɔ. Rammer si ŋu ŋusẽ le meɖea afɔku ɖa o, gake etrɔa dɔa tso asi ƒe ŋusẽ dzadzɛ dzi yia mɔ̃a zazã si dzi wokpɔna dzi. Ema ate ŋu aɖe abi siwo woxɔna le teteɖeanyi me dzi akpɔtɔ eye wòana dɔwɔwɔ nanyo ɖe edzi ne wona hehe ʋua me dɔwɔlawo nyuie eye wolé be na dɔwɔnuawo.

Le kontraktɔ siwo kpɔa mɔdodowo ƒe ɖɔɖɔɖo, elektrikŋusẽnamɔ̃wo gbugbɔgaɖɔɖo, kple afɔtoƒewo ƒe dɔwo gbɔ gome la, dɔwɔwɔ ƒe vodada si bɔ wue nye be woabu alesi asidɔwɔwɔ va zua dɔmawɔmawɔ kabakabae nu tsɛe. Ne eva hiã be ʋua me dɔwɔlawo naƒo ƒuta geɖe nu ƒu ko la, asi ƒe mɔnuwo meganyea tiatia “bɔbɔe” o. A tamping rammer ƒe ƒuƒoƒo va zua dɔwɔnu si wɔa dɔ wu elabena eƒoa dɔwɔɣi kple nyonyome ƒe tɔtrɔ siaa nu ƒu wòzua ɖoɖo si dzi woate ŋu akpɔ ŋusẽ ɖo.

Alesi Nàtia Rammer Kple Manual Compaction Dome

Tiatia nyuitɔ nɔ te ɖe nu ene siwo trɔna dzi: mɔɖeɖe ƒe kekeme, anyigba ƒe ƒomevi, kɔkɔƒe ƒe goglome, kple nyonyome ƒe taɖodzinu. Ne teƒea keke eye wòle gbadzaa la, mɔ̃ bubu ate ŋu anyo wu. Ne teƒea le gbadzaa gake goglo la, zi geɖe la, tamping rammer ye nyea ŋuɖoɖo nyuitɔ kekeake. Ne teƒea le sue eye agba si hiã la mesɔ gbɔ o la, woate ŋu alɔ̃ ɖe asi ƒe nutete dzi kokoko. Vodadaae nye be woatiae to numame dzi tsɔ wu be woatiae le teƒea ƒe nɔnɔme nu.

1. Dzidze dɔwɔwɔ ƒe teƒea ƒe kekeme kple mɔxenu siwo dzi woato age ɖe eme.
2. De dzesi anyigba ƒe ƒomevi kple tsidzadza ƒe didime si wokpɔ mɔ na.
3. Kpɔ density alo compaction standard si wobia dzi.
4. Tia dɔwɔnu si ate ŋu akpɔ emetsonu siwo woate ŋu agbugbɔ awɔ ne wogbugbɔ wɔ dɔ suetɔ kekeake.
5. Doe kpɔ eye nàɖo kpe edzi hafi nàtsyɔ ʋu si kɔa ʋua dzi.

Le nuƒlela siwo tsɔa dɔwɔnuwo sɔna kple wo nɔewo le mɔdododzidɔ alo kɔkrit ƒe nuwuwu ƒe hatsotso aɖe me gome la, zi geɖe la, nyametsotso si wowɔna tsɔ ƒoa wo nu ƒui la sɔna ɖe dɔwɔwɔ ƒe ɖoɖo si keke ta wu nu. Kɔntraktɔ ate ŋu azã a plate compactor ƒe mɔ̃ le gɔmeɖoanyi teƒewo gome la, a tamping rammer ƒe ƒuƒoƒo na nuto siwo ŋu woxe mɔ ɖo, kple a kɔnkrit ƒe ʋuʋudedi na kɔnkrit yeyewo ƒe ƒoƒo ƒu ɖekae. Nya lae nye be woatsɔ mɔ̃a asɔ kple nusi wotsɔ wɔe kple eƒe nɔnɔme, ke menye be woazi dɔwɔnu ɖeka dzi be wòawɔ dɔ ɖesiaɖe o.

Dzadzraɖo Kple Dɔwɔwɔ Ŋuti Tohehe Kpɔa Ŋusẽ Ðe Xexeame Ŋutɔŋutɔ ƒe Emetsonuwo Dzi

Tamper nyuitɔ kekeake gɔ̃ hã mewɔa dɔ nyuie o ne woŋe aɖaba ƒu beléle nɛ dzi. Yaƒoƒomɔ̃wo, ami ƒe nyonyome, afɔkpa ƒe vuvu, kple nusiwo ʋuʋuna katã kpɔa ŋusẽ ɖe ya si dona kple kakaɖedzi dzi. Ele be mɔ̃dzikpɔlawo nalé ŋku ɖe gasɔa zazã nyuie o, afɔti si mesɔ o, kple ƒuƒoƒoa ƒe titrime si gbɔ eme hã ŋu, elabena mɔ̃ mate ŋu axe fe ɖe aɖaŋu gbegblẽ ta o.

Le nyateƒe me la, ŋkuléle ɖe nu ŋu do ŋgɔ na gɔmedzedze nye compaction quality ƒe akpa aɖe. Mɔ̃ si ƒe akpa aɖewo vuvu alo esi meli ke o si mele dɔ wɔm o ate ŋu anɔ dɔ wɔm kokoko, gake eƒe agblemenuku ƒe wɔwɔme ate ŋu aɖiɖi. Ema le vevie elabena nutete nye nuƒoƒoƒu: ɖewohĩ mɔ si gbɔdzɔ ɖeka madze nu vevi o, ke hã ate ŋu ana nuto si me amewo mesɔ gbɔ ɖo o si ana woava nɔ anyi emegbe. Ʋua me dɔwɔla siwo ɖɔa ŋu ɖo bua tamper la be enye dɔwɔnu nyui aɖe, ke menye akplɔ si ŋu ŋusẽ le ko o.

• Lé ŋku ɖe ami, yaƒoƒomɔ̃, kple nusiwo wotsɔ blaa nu ŋu hafi nàtrɔ asi le dɔ ŋu ɖesiaɖe.
• Lé ŋku ɖe afɔkpaa kple afɔkpaa ƒe akɔtaɖonuwo ŋu be wodo alo gblẽ hã.
• Compact le lifts tsɛwo me tsɔ wu be nàdze agbagba “awɔ” goglome le mɔzɔzɔ ɖeka me.
• Na tsi nanɔ afisi wòate ŋu awɔ dɔ le hafi nàdze egɔme.
• Kpɔ density ɖa le afisi dɔa atsɔ agba alo alɔ afɔdzideƒe.

Nyataƒoƒo ŋutɔŋutɔ: Rammer vs Manual Compaction

Nyataƒoƒo si me kɔ wue nye be asi ƒe nutete nye mɔnu si wozãna tsɔ tsia megbe, gake tamping rammer ya nye dɔwɔnu nyuitɔ si wotsɔ wɔa anyigba ƒe dɔwɔwɔ le teƒe siwo woxe mɔ na ƒe akpa gãtɔ. Asi ƒe ʋuʋu ate ŋu akpɔ kuxi sue ŋutɔwo gbɔ kokoko, gake enɔa te ɖe dɔwɔla ƒe ŋusẽ dzi akpa eye mewɔa ɖeka akpa na megbekɔkɔ kple edzadzraɖodɔ sesẽwo o. Tamping rammer naa duƒuƒu, gbugbɔgawɔ, kple eƒe nyonyome dzi kpɔkpɔ nyona ɖe edzi, si tae wònye tiatia si wodi wu na dowo ɖeɖe, goawo ƒe akpawo, kple nuzazãwo gbugbɔgaɖoanyi ɖo.

Ne wò dɔa lɔ megbekɔkɔe enuenu, patch dzadzraɖo, alo mɔto dzi dzadzraɖo ɖe eme la, ele be nànɔ te ɖe dɔwɔnuawo ƒe nyametsotso kple woƒe agbɔsɔsɔme si woate ŋu age ɖo dzi, ke menye nenye be dɔa dze sue le ŋkuléle ɖe eŋu zi gbãtɔ me o. Zi geɖe la, kontraktɔ siwo ɖoa dzidzenu si nye compaction step la kpɔa callbacks ʋɛ aɖewo kple handoff dzadzɛ wu na asitsatsa si kplɔe ɖo. Emae nye viɖe ŋutɔŋutɔ si le ʋuʋu tso asi ƒe nutete dzi yi mɔ̃ dzi.

Le mɔ siwo keke wu kple kɔkrit ƒe dɔwɔwɔ gome la, zi geɖe la, nu nyuitɔ kekeake dona tsoa dɔwɔnu siwo wotsɔ ƒoa ƒui kple dɔwɔnu siwo sɔ siwo kpena ɖe eŋu, abe plate compactors ƒe mɔ̃wo , anyigba ƒe nutunu siwo wotsɔna ƒoa nu , kple kɔnkrit-tsolawo . Ne wotsɔ afɔɖeɖe ɖesiaɖe sɔ kple dɔa la, agblea ƒe nyonyome dzi ɖuɖu va nɔa bɔbɔe eye gbugbɔgawɔ nɔa bɔbɔe.

Nyabiasewo ƒe Nyabiasewo

Ðe tamping rammer nyona ɣesiaɣi wu asi ƒe nutetea?

Ao, tamping rammer nyo wu na dɔ akpa gãtɔ siwo wowɔna le teƒe siwo wotu kple agbatsɔtsɔ, gake asi ƒe nutete ate ŋu asɔ kokoko na asikaka nu suesuesue siwo me afɔku mele o le afisi dɔwɔnuwo mawɔ dɔ nyuie o.

Anyigba ƒomevi kawoe ɖea vi na tamping rammer wu?

Zi geɖe la, anyigba siwo wɔ ɖeka kple esiwo mewɔ ɖeka ƒe akpa aɖe, vevietɔ do siwo me woɖea do le megbe kple esiwo le goawo dzi, ɖea vi wu elabena ŋusẽkpɔɖeamedzi ƒe afɔɖeɖe kpena ɖe ame ŋu be woƒe kpekpeme nyona ɖe edzi le teƒe siwo woxe.

Nukatae zi geɖe la, asi ƒe nutete nana wova nɔa anyi emegbe?

Elabena esesẽna be woana ŋusẽ, nutsyɔnu, kple nu kɔkɔ ƒe titrime nanɔ ɖeka le teƒe bliboa si wodzraa nu ɖo, si ate ŋu agblẽ teƒe falɛfalɛ siwo anɔ anyi le ʋuwo ƒe zɔzɔ alo tsi ƒe tɔtrɔ te.

Dzidzenu kawoe wozãna zi geɖe tsɔ drɔ̃a ʋɔnu nutete ƒe nyonyome?

ASTM D698 kple ASTM D1557 nye Proctor compaction dzidzenu siwo wozãna geɖe hena agble ƒe kpekpeme tsɔtsɔ sɔ kple nudokpɔƒe ƒe dzidzenuwo.

Ɣekaɣie wòle be matia plate compactor ɖe tamping rammer teƒe?

Tia plate compactor na anyigba siwo keke, siwo le gbadzaa, siwo le ʋeʋẽm le afisiwo nutsyɔtsyɔ le vevie wu afɔɖeɖe si akpɔ ŋusẽ gã aɖe ɖe teƒe gbadza aɖe.

Aleke mawɔ anya ne anyigbaa sɔ na ƒoƒo?

Ele be woatsɔ anyigbaa ade tsi si sɔ me eye woatsɔe ade nu kɔkɔƒe siwo le tsɛ ale gbegbe be mɔ̃ si wotia la nate ŋu aƒo anyigba bliboa nu ƒu nyuie.

Vodada gãtɔ kae ʋua me dɔwɔlawo wɔna le compaction me?

Vodada si bɔ wue nye be woatia dɔwɔnu si mesɔ o na teƒea ƒe geometry, emegbe woadze agbagba atsɔ pass bubuwo aɖo eteƒe tsɔ wu be woaɖɔ dɔwɔwɔa ɖo.