- Mixer ƒe ʋuʋu fũ akpa menye atsyɔ̃ɖoɖo ƒe nya o; zi geɖe la, efia be womeda sɔ o, womeɖe asi le wo ŋu o, alo bearing la vuvu.
- Nu gbãtɔ si wɔa dɔ wue nye be woaɖe mɔ̃a ɖe vovo, akɔ nusiwo ƒo ƒu ŋu, eye woalé ŋku ɖe alesi wòsɔ ɖe ɖoɖo nu ŋu hafi aɖɔli eƒe akpa aɖewo.
- Zi geɖe la, ʋuʋudedi ƒe kuxiwo gagblẽna ɖe edzi ne wotsɔ agba siwo wotsɔ ƒo ƒui, gɔmeɖoanyi siwo mesɔ o, kple beléle na wo si wodzo le mɔxexeɖedɔléle nu.
- Le kontraktɔawo gome la, ʋuʋudedi ƒe nya si gbugbɔna dzɔna ate ŋu ana ɣeyiɣi si woatsɔ awɔ dɔe, dedienɔnɔ ƒe afɔku, kple nuwo ƒe gbegblẽ ne woŋe aɖaba ƒu edzi.
Elabena be a kɔnkrit tsakatsaka nu ma eʋuʋuna fũ akpa , menye nusi le ʋuʋum koe nye nyabiase vevitɔ o, ke boŋ nusita wole ʋuʋua dzim ɖe edzi; le nuwɔna me la, zi geɖe la, esia dzea egɔme tso dadasɔmakpɔmakpɔ, akpa siwo trɔna siwo vuvu, alo xɔtunu si bɔbɔ nɔ anyi le anyigba dzi, eye esia tae ame si ɖɔa ame ɖo ɖo mixer ƒe ʋuʋudedi ɖɔɖɔɖo ele be woadze egɔme kple ŋkuléle ɖe nu ŋu, dzidzedze, kple dzadzɛnyenye tsɔ wu be woasusui. Le xɔtudɔwɔnuwo gome la, vodada suesuesue siwo wowɔna le ɖoɖowɔwɔ ɖe wo nɔewo ŋu me ate ŋu adzi ɖe edzi kabakaba, eye nufiamedzidzenu siwo wowɔna edziedzi abe ISO 16089:2015 ƒe xexlẽme na mɔ̃wo ƒe dedienɔnɔ kple ASTM F2493-20 ƒe agbalẽ na dodokpɔ si ku ɖe dedienɔnɔ ŋu gbegbɔgblɔ kpena ɖe ame ŋu be wòaɖe alesi gbegbe dɔwɔwɔ kple beléle na wo si dzi wokpɔna le vevie ne mɔ̃ siwo trɔna le eme.
Nusita Kɔkrit Tɔtɔmɔ̃ Ʋuʋuna Geɖe: Mɔ̃ɖaŋununya Vevi Siwo Gbɔ Wòtso
Zi geɖe la, mɔ̃ ƒe nɔnɔme atɔ̃awo dometɔ ɖeka nyea nusi gbɔ wòtsona, eye wo dometɔ ɖesiaɖe naa ʋuʋudedi ƒe nɔnɔme vovovo.
Ƒã hafi mixer dzea ʋuʋu gɔme nuxlɔ̃ame manɔmee; kpododonu akpa gãtɔ va doa mo ɖa vivivi ne nusiwo gblẽ, ɖiƒoƒo, alo nusiwo wotsɔ ɖoe ƒe gbegblẽ le dzidzim ɖe edzi.
Ne wò kɔnkrit tsakatsaka la ʋuʋuna akpa la, ele be nàbu tame le alesi wòtrɔna, eƒe kpeɖeŋutɔ ƒe blibonyenye, kple ŋusẽ ƒe kaka ŋu tsɔ wu be nàbu kpẽa ŋutɔ ŋu.
| Anɔ eme be nusi gbɔ wòtso | Dzesi si bɔ | Nusiwo ŋu wòle be woalé ŋku ɖo | Nu si le veviẽ |
|---|---|---|---|
| Agba ƒe mama si mesɔ o | Ʋuʋudedi dzina ɖe edzi ne batch ƒe lolome aɖewo le edzi yim | Batch ƒe kpekpeme, tsidzadza, yɔyɔ ƒe dzidzenu | Kɔ |
| Kɔkrit si sesẽ ƒe ƒuƒoƒo | Ʋuʋudedi si le ɣeyiɣi ƒe didime nu, ʋuʋudedi si wokpɔna | Drum ememe, blades, nuyi si dona le eme | Kɔ |
| Bolt alo mountings siwo le gbadzaa | Clattering, frame ƒe ʋuʋu | Base bolts, mɔ̃a ƒe ʋuƒo, dzɔla ƒe nusiwo wotsɔna blaa nu | Kɔ |
| Bearings siwo vuvu | Dzoxɔxɔ, toɣliɖeɖe, axadzifefe | Shaft fefe, bearing dzoxɔxɔ, ami ƒe nɔnɔme | Nye nu sesẽ |
| Frame si to vovo na dzidzenu | Mɔ̃wo ƒe zɔzɔ alo kpewo | Anyigba ƒe nɔnɔme, afɔwo, tasiaɖamfɔwo ƒe chocks | Le vedome |
Agba si mesɔ o nye nusiwo nana wòato bɔbɔe wu dometɔ ɖeka elabena mixer la ate ŋu adze nyuie le batch ɖeka me eye wòaʋuʋu vevie le esi kplɔe ɖo me. Ne tsi ƒoƒu ƒo ƒu ɖe kpẽa ƒe akpa ɖeka la, ƒuƒoƒo si le tɔtrɔm la megada sɔ le ŋusẽ me o. Dadasɔ ma nu sẽna ɖe edzi ne kpẽkuku ƒe duƒuƒu le dzi yim.
Nusiwo ƒoa ƒu sesĩe bɔ ɖe dɔwɔƒewo vevietɔ le afisiwo tsilele tsia megbe le. Siminti si wotsɔ ƒo ƒu alo nusiwo wotsɔ ƒo ƒui ƒe ƒuƒoƒo wɔa dɔ abe nusi wotsɔ kpe ɖe eŋu ene le kpẽa ƒe akpa ɖeka, si trɔa nuheŋusẽ ƒe titina eye wònaa ʋuʋudedi nɔa tsatsam le eƒe tɔtrɔ ɖesiaɖe me.
Nusiwo wotsɔna blaa nu siwo me mekɔ o hã nye nya bubu si bɔ enuenu, vevietɔ le asitelefon dzi tsakatsaka siwo wozãna le ʋuɖoɖo ƒe nɔnɔme sesẽwo me ŋu. Ne mɔ̃a ƒe gɔmeɖoanyiwo, mɔ̃a ƒe ʋuƒo, alidziblanu ƒe dzɔlawo, alo ʋuƒoa ƒe kadodowo vuvu la, mɔ̃a ate ŋu aɖi le esi teƒe be wòaxɔ tɔtrɔ nyuie.
Mixer Vibration Fix: Nusiwo Woalé ŋku Ðe Gbã Le Teƒea
Nusi le dedie wu eye wòwɔa dɔ kabakaba wu le mixer vibration fix enye teƒea me toto ɖe ɖoɖo nu hafi woaɖɔli akpa aɖeke.
Woate ŋu aɖe ʋuʋudedi ŋuti nyatoƒoetoto akpa gãtɔ dzi akpɔtɔ le miniti 20 teti me ne dɔwɔla la zɔ ɖe ɖoɖo si woate ŋu agbugbɔ awɔ dzi.
- Tsi mɔ̃a eye nàɖe elektrikŋusẽ ɖe vovo.
- Kpɔe ɖa be nu sesẽwo ƒo ƒu ɖe kpẽa ŋu hã.
- Lé ŋku ɖe gavi, ʋuƒo, kple dzɔla siwo katã woate ŋu akpɔ ŋu.
- Trɔ kpẽa kple asi eye nàɖo to ne èle ʋuʋum alo be eƒe bearing le ƒuƒlu.
- Kpɔ egbɔ be mɔ̃a bɔbɔ nɔ anyigba si li ke dzi.
- Kpɔe ɖa be dzoxɔxɔ si mesɔ o le bearing ƒe xɔ kple ʋua ƒe akpa aɖewo hã ŋu.
Nusiwo kplɔ wo nɔewo ɖo ma le vevie elabena zi geɖe la, ʋuʋudedi nyea dzesi, ke menye ke ƒe gbɔdzɔgbɔdzɔ o. Le kpɔɖeŋu me, ne wokɔ tsi si ƒo ƒu ɖe mɔ̃a ŋu la, ate ŋu aɖe ʋuʋudedi dzi akpɔtɔ enumake, gake ne bearing la ƒe ememe gblẽ xoxo la, ne wonya gade agba mɔ̃a me ko la, ʋuʋua atrɔ ava. Mɔnu si li ke tsɔ léa ŋku ɖe nu ŋue nye nusi ma ɣeyiɣi kpui aɖe ƒe nuwo ɖɔɖɔɖo kple nuwo ɖɔɖɔɖo si nɔa anyi didina dome.
Le torque ƒe kpeɖodzinana gome la, ele be beléle na ƒuƒoƒowo nazã sesẽme ƒe asixɔxɔ siwo woŋlɔ ɖi tso mɔ̃a ƒe mɔfiamegbalẽa me kple dɔwɔnu si wodo kpɔ; torque practice nye dziɖuɖunya, menye akɔntabubu o, eye NIST dzidzedze ƒe gɔmeɖosewo ɖea vi na nusitae unit siwo woate ŋu agbugbɔ awɔ kple calibration le vevie le agbledzikpɔkpɔ me gɔmesese. Nyataƒoƒo bɔbɔetɔ kekeakee nye be ne wobla mixer aɖe wògbɔ eme, woblae sesĩe akpa, alo wodzrae ɖo kple nusi wotsɔ blaa nu ƒe tete si mewɔ ɖeka o la, zi geɖe la, ʋuʋu akplɔe ɖo.
| Nusi wotsɔ léa ŋku ɖe nu ŋu | Nɔnɔme nyui aɖe le eme | Kuxi ƒe dzesi | Nuwɔwɔ |
|---|---|---|---|
| Drum ƒe anyigba | Dzadzɛ, dadasɔ, ɖekawɔwɔ | Aŋɔ sesẽ si wotu ɖe edzi | Klɔe eye nàklɔe ɖa |
| Bearing ƒe xɔ | Fafa vaseɖe esime wòaxɔ dzo | Dzoxɔxɔ, toɣliɖeɖe, ʋuʋudedi | Si ami na bearing alo ɖɔlii |
| Bolts siwo wotsɔ ɖoa xɔa dzi | Gbɔ̃ hã eye wòle dedie | Ʋuʋu alo dometsotso siwo wokpɔna | Retorque na spec |
| Kpekpeɖeŋunamɔ̃ | Level kple rigid | Ʋuʋu alo ʋuʋu | Gbugbɔ ɖɔe ɖo eye nàtsɔe ablae |
Alesi Drum ƒe Masɔmasɔ Naa Kɔkrit Mixer ƒe Ʋuʋu Gãna
Drum ƒe dadasɔmakpɔmakpɔe nye nusi bɔ wu le ŋutilã me susu si ta kɔnkrit tsakatsaka ʋuʋuna fũu akpa.
Ne womegama agbɔsɔsɔme si le tɔtrɔm la sɔsɔe o la, ŋusẽ siwo le titina la dzina ɖe edzi ne wole du dzi eye ʋuʋudedia va dzena le agba te wu ne womewɔ dɔ aɖeke o.
Nu sue aɖe si lé ɖe eŋu gɔ̃ hã ate ŋu ana masɔmasɔ si woate ŋu adzidze ne ele adzɔge tso afisi wòtrɔna ɖo gbɔ.
Esia tae dɔwɔlawo gblɔna zi geɖe be mixer la “nyona ne eƒuƒlu” gake meganɔa te o le batch ʋɛ aɖewo megbe; kuxia gasẽna ɖe edzi ne wotsɔ agbɔsɔsɔme si wotsɔ kpe ɖe eŋu, tsidzadza, kple nusiwo woƒo ƒu ƒe mama si mesɔ o. Le nyateƒe me la, ema fia be mɔ̃ aɖe ate ŋu ato ŋkuléleɖenuŋu si wowɔna le vome me eye wòado kpo nu kokoko le dɔwɔwɔ ƒe nɔnɔme ŋutɔŋutɔwo me.
Ne wokɔ kpẽa ŋu nyitsɔ laa gake ʋuʋua gakpɔtɔ li la, ke lé ŋku ɖe akplɔawo, ʋuƒoawo, kple tsi si dona le eme ƒe nɔnɔme ŋu. Ememe akpa siwo wobɔbɔ alo esiwo vuvu ate ŋu atrɔ agbaa ƒe mɔ, si ana ʋuʋudedi ƒe dzesi si gbugbɔna si nana wòase le eɖokui me abe ɖe mixer la le “ade dam” le tɔtrɔɣi ene.
Le dɔwɔwɔ atraɖii le mɔdodowo kple afɔtoƒewo tutu gome la, kontraktɔ aɖewo dina be yewoana mixer la nate ɖe teƒea ƒe dɔwɔnu bubuwo abe kɔnkrit tsakatsakanuwo , elabena zi geɖe la, ehiãna be nuwo ŋudɔwɔwɔ kple wo ɖoɖo ɖe hatsotsowo me nawɔ ɖeka kple mɔdodowo, wo ɖɔliɖɔli, kple wo dzadzraɖo ƒe ɖoɖowɔɖiwo. Le dɔwɔwɔ ƒe ɖoɖo ma ke me la, ʋua me dɔwɔlawo hã ate ŋu azãe plate compactors ƒe mɔ̃wo na gɔmeɖoanyi dzadzraɖo kple rammers ƒe amegãwo na do kple edge compaction, eyata ʋuʋudedi ƒe nya aɖe le mɔ̃ ɖeka me ate ŋu agblẽ teƒea ƒe dɔwɔwɔ ɖe wo nɔewo yome bliboa me.
Bearing ƒe Gbegblẽ, Ʋukuku ƒe Kuxiwo, Kple Xɔtuɖaŋu ƒe Ʋuʋu
Bearing ƒe vuvue nye nusi gbɔ afɔku le wu elabena ate ŋu adzi ɖe edzi tso ʋuʋu dzi va ɖo alɔ̃madɔmadɔ dzi.
Ne bearingwo megate ŋu ɖua woƒe ʋuʋu dzi o la, ʋuƒoa megatrɔna le teƒe ɖeka o, eye nusi dona tso emee nye be woʋuʋuna, dzoxɔxɔ, toɣliɖeɖe, kple nusiwo gblẽna le nutrenuwo kple xɔwo ŋu vivivi.
Ʋukuku ƒe kuxiwo hã hea nu ma tɔgbe vɛ, vevietɔ ne alidziblanuawo ƒu alo ne alidziblanuawo mesɔ o.
Xɔtuɖaŋu ƒe ʋuʋu nye mɔ vevi etɔ̃lia. Ne afɔtiwo, afɔti siwo wotsɔ léa afɔti, alo afɔti siwo wotsɔ léa nu ɖe te megale sesẽm o la, tsakatsaka la ate ŋu aɖi le duƒuƒu aɖewo me eye wòana ʋuʋudedi si dzi woate ŋu aɖu ne menye nenema o la nadzi ɖe edzi. Esia tae mɔ̃ si dze abe ɖe wòɖe asi le eŋu vie ko le ŋkuléle ɖe eŋu me ene ate ŋu awɔ nu le mɔ si womate ŋu agblɔ ɖi o nu le agba te.
| Vodada ƒe ƒomevi | Field clue | Nusi ate ŋu ado tso eme | Dzadzraɖo ƒe mɔ |
|---|---|---|---|
| Bearing ƒe vuvu | Dzoxɔxɔ kple toɣliɖeɖe si le ŋeŋem | Shaft misalignment kple kpododonu | Tsɔ bearing set la ɖɔ li |
| Belt slip | Duƒuƒu ƒe tɔtrɔ | Torque ƒe bu kple ʋuʋudedi ƒe agba | Trɔ asi le tension kple alignment ŋu |
| Pulley ƒe ɖoɖo si mesɔ o | Edge wear le alidziblanu dzi | Axadzi agbatsɔtsɔ kple ʋuʋudedi | Gbugbɔ ɖo pulleywo ɖe ɖoɖo nu |
| Loose frame | Ʋuʋu alo ʋuʋu | Resonance kple bolt ƒe ɖeɖiteameŋu | Gbugbɔ gasẽe eye nàdo ŋusẽe |
Nusi woate ŋu atsɔ ayi teƒe bubuwo le bɔbɔe: ne dzoxɔxɔ, toɣliɖeɖe, alo axadzifefe kpe ɖe ʋuʋudedi ŋu la, ke nyaa gbɔ atsyɔ̃ɖoɖo ƒe beléle ŋu xoxo. Mele be woatutu mɔ̃a to asitɔtrɔ bubu me o vaseɖe esime woda akpa siwo le tɔtrɔm la kpɔ nyuie hafi.
Alesi Dɔwɔwɔ ƒe Nɔnɔmewo Trɔa Ʋuʋudedi le Kɔkrit Tɔtɔmɔ̃ me
Dɔwɔwɔ ƒe nɔnɔmewo ate ŋu ana mixer si le lãmesẽ me nase le eɖokui me be yegblẽ.
Agba tsɔtsɔ fũu akpa, tsakatsaka ƒe ɖoɖo si mewɔa dɔ nyuie o, kple anyigba si meli ke o katã ate ŋu ana ʋuʋudedi nadzi ɖe edzi ne mɔ̃a ŋutɔ le mɔ̃ dzi gɔ̃ hã.
Esia tae wòle be dɔléle si wokpɔna le xexeame ŋutɔŋutɔ nalɔ dɔa ƒe nɔnɔme ɖe eme, ke menye dɔwɔnuawo ɖeɖeko o.
Ne woyɔ kpẽa me wu alesi woɖoe be wòawɔ dɔ la, agbaa ate ŋu atrɔ sesĩe ne nuawo le gegem. Ne wotsɔ nusiwo ƒo tsi kple esiwo ƒu ƒu gbe ɖe wo nɔewo yome nyuie o la, ƒuƒoƒo ate ŋu adzɔ eye woatsi kpẽa ƒe akpa ɖeka. Ne mixer la bɔbɔ nɔ anyigba falɛfalɛ alo kpe gbadzɛ siwo mesɔ o dzi la, xɔa ate ŋu abɔbɔ eye wòatsɔ ʋuʋu ayi chassis la me.
Zi geɖe la, gbeadzidɔwɔla siwo wɔa dɔ le mɔdodowo dzadzraɖo alo asitsaƒe suewo tutu ŋu tsɔa dɔwɔnuwo yia teƒe bubu enuenu, si fia be gɔmedzeƒea ƒe nɔnɔmewo trɔna tso teƒe ɖeka yia bubu. Tɔtɔmɔ̃ si wɔa dɔ nyuie le kpe gbadzɛ dzi ate ŋu aʋuʋu wu sã le anyigba si wotsɔ megbe yɔe dzi.
- Na batchwo nanɔ dɔwɔwɔ ƒe agbɔsɔsɔ si wokafu la me.
- Keke aggregate kple cement ɖe enu sɔsɔe hafi nàdze tɔtrɔ gɔme.
- Zã nusiwo li ke, siwo le gbadzaa, siwo dzi nànɔ te ɖo ɣesiaɣi si wòanya wɔ.
- Lé ŋku ɖe tasiaɖamfɔwo ƒe gaƒoɖokuiwo, tsitrenu, kple xɔtunu ƒe kadodo teƒewo ŋu hafi nàdze egɔme.
Le teƒea ƒe ƒuƒoƒo siwo hã kpɔa dɔwo wuwu kple wo ɖeɖe dzi gome la, dɔwɔwɔ ƒe ɖoɖo si keke ta wu si ate ŋu alɔ eme ƒe akpa ɖeka koe mixer la nye mɔ̃ siwo wotsɔ lãa kɔkrit kple ŋusẽ ƒe ʋuƒo . Ʋuʋudedi ƒe kuxi si le mɔ̃ ɖeka me ate ŋu ahe kɔkrit ɖoɖo, eƒe gowo wuwu, kple ƒunukpeƒewo ɖeɖe ɖe megbe, eyata mɔxexe ɖe enu kpɔa ŋusẽ ɖe ɖoɖowɔɖi dzi tẽ.
Dzadzraɖo ƒe Dzidzenuwo kple Dziɖuɖu si Woate Ŋu Adzidze na Mixer Vibration
Woate ŋu aka ɖe beléle si wodzidze dzi wu nuwo ɖɔɖɔɖo si wotu ɖe nuwɔna dzi.
Ne womewɔa cadence si wowɔna edziedzi tsɔ léa ŋku ɖe nu ŋu o la, zi geɖe la, ʋuʋudedi ƒe kuxiwo gatrɔna vaa eme elabena womeɖe awudodo ƒe nɔnɔme si le ete la ɖa o.
Le kontraktɔ siwo kpɔa mɔ̃ geɖe dzi gome la, nu nyuitɔ kekeakee nye be woawɔ beléle na mɔ̃a ŋuti nuŋlɔɖi bɔbɔe aɖe si me woalé ŋku ɖe wo ŋu, woakɔ wo ŋu, woalé ŋku ɖe woƒe ŋusẽ ŋu, eye woaŋlɔ woƒe bearing ƒe nɔnɔme ɖi le dɔwɔwɔ ƒe dometsotso ɖesiaɖe megbe.
Mɔ̃wo ŋuti nyatakaka siwo sɔ abe ISO 12100:2010 le mɔ̃wo ƒe afɔku dzi ɖeɖe kpɔtɔ ŋu kple OSHA ƒe xɔtudɔwɔnuwo ŋuti sewo do ŋusẽ asixɔxɔ si le dzɔlawo, nutsitsi dedie, kple afɔkuwo dzi ɖuɖu ŋu le dɔwɔnu siwo trɔna dzi kpɔkpɔ me. Togbɔ be nuŋlɔɖi siawo megblɔ alesi nàɖɔ mixer ƒe gbagbã ɖesiaɖe ɖo na wò o hã la, woɖe dedienɔnɔ ƒe susu si hiã na gbeadzisubɔsubɔ me.
Ele be ʋuʋudedi dzi ɖuɖu ƒe ɖoɖo nyui aɖe naŋlɔ nu etɔ̃ ɖi: dzesia, nusi wosusu be etso, kple afɔɖeɖe si woatsɔ aɖɔe ɖo. Ema nana ʋuwo dzikpɔla kpɔa nenye be mɔ̃ ɖeka yia edzi trɔna gbɔna kple nya ma ke, si fia zi geɖe be womeɖe nusi gbɔ wòtso la ɖa keŋkeŋ gbeɖe o.
| Dzadzraɖodɔ | Dometsotso si wokafu | Nusita wòle vevie | Afɔku ne wodzo le edzi |
|---|---|---|---|
| Klɔ kpẽ kple akplɔwo ŋu | Gbesiagbe le eŋudɔwɔwɔ vɔ megbe | Exea mɔ na buildup ƒe dadasɔmakpɔmakpɔ | Wobble si yia edzi enuenu |
| Kpɔ nusiwo wotsɔ blaa nuawoe ɖa | Kwasiɖa sia kwasiɖa | Ekpɔa alesi woɖea asi le nu ŋui dzi | Frame ƒe ʋuʋu |
| Lé ŋku ɖe bearingwo ŋu | Kwasiɖa sia kwasiɖa alo le gaƒoƒo nu | Dea dzesi awudodo kaba | Seizure kple nutsitsi |
| Kpɔ egbɔ be wowɔ ɖeka kple wo nɔewo | Ɣleti sia ɣleti | Eɖea agba siwo le axadzi dzi kpɔtɔna | Ʋukuku kple shaft ƒe gbegblẽ |
Ɣekaɣie Nàdzra Mixer la Ðo, Aɖɔli, Alo Adzudzɔe
Ele be woanɔ te ɖe vodada gbugbɔgawɔ zi gbɔ zi geɖe kple eƒe akpa aɖewo ƒe gazazã dzi atso nya me be woadzra mɔ̃a ɖo alo aɖɔlii, ke menye ɖe mɔ̃a ƒe dɔwɔwɔ kokoko dzi o.
Ne ʋuʋudedi gatrɔ va le dzadzɛnyenye kple gaviwo gbugbɔgabla vɔ megbe la, afɔɖeɖe si kplɔe ɖoe nye be woaɖɔli akpa aɖewo, vevietɔ bearing, belt, pulley, alo shaft support parts.
Ne xɔtunua me gbã, ʋuƒoa ƒe xɔme tro, alo kpẽa vuvu vevie le mɔ si to vovo nu la, eɖɔliɖɔli ate ŋu axɔ ga geɖe wu ɖɔɖɔɖo si woatsɔ aɖɔe enuenu.
Nyametsotso ma va nɔa vevie wu le asitsadɔ siwo me dɔ siwo me womewɔa dɔ le o ƒe gazazã lolo wu akpaa ŋutɔ. Mixer si to ewɔwɔ ƒe fesre aɖe me ate ŋu ahe eɖoɖo, ewuwu, kple teƒea ƒe asitsatsa siwo kplɔe ɖo ɖe megbe.
Le mamalawo kple kontraktɔ gome la, nyametsotso si wowɔ be woadzrae ɖo kple esiwo woatsɔ aɖɔlii hã ku ɖe kakaɖedzi si wokpɔ mɔ na le agblea dzi ŋu. Ne dɔwɔnu aɖe ʋuʋu enuenu le agba siwo sɔ te la, meganye dɔwɔnu si dzi woate ŋu aka ɖo o, ne woate ŋu ali ke hena ɣeyiɣi aɖe gɔ̃ hã.
- Dzrae ɖo ne nya la nye xɔtunu siwo me mekɔ o, anyigba ƒe ƒuƒoƒo, alo alignment drift sue aɖe.
- Tsɔe ɖɔ li ne bearing, shaft, alo drive ƒe akpa aɖewo ɖee fia be wole vuvum enuenu.
- Dzudzɔ ne xɔtunu, kpẽ, alo kpeɖeŋutɔ ƒe xɔtunua gblẽ.
Kuxiwo Gbɔkpɔkpɔ ƒe Dɔwɔwɔ Nyuie na Kɔkrit Mixer Vibration Fix
Kuxiwo gbɔ kpɔkpɔ ƒe dɔwɔwɔ si woɖo ɖe ɖoɖo nu ɖea akɔntabubu dzi kpɔtɔna eye wònaa tɔtrɔ yi dɔwɔwɔ me kabakaba.
Dɔwɔwɔ ƒe ɖoɖo si wɔa dɔ wue nye be woakpɔ dɔlélewo tso nusiwo gbɔ wòtso bɔbɔe wu eye woƒe asi bɔbɔ wu dzi va ɖo esiwo xɔ asi wu eye wodzea ame dzi wu dzi.
Zi geɖe la, ɖoɖo ma ɖea ɣeyiɣi dzi kpɔtɔna elabena ɖiƒoƒo, ʋuʋu, alo ɖoɖowɔwɔ ƒe vodadawo gbɔe ʋuʋudedi geɖe tsona tsɔ wu be woado kpo nu vevie.
Dze egɔme kple biabia nenye be agba te koe ʋuʋudedia dzena alo ne womewɔ dɔ aɖeke o hã. Ne agba te koe wòdzena la, ke lé ŋku ɖe batching, fill volume, kple material distribution ŋu. Ne edze le dɔmawɔmawɔ me la, ʋu yi mɔ̃wo ƒe dadasɔmakpɔmakpɔ, bearingwo, kple mounting integrity gbɔ tẽ.
Eyome, ŋlɔe ɖi nenye be ʋuʋudedia nye esi nɔa tsatsam, le vome, alo enɔ te ɖe duƒuƒu dzi. Zi geɖe la, ʋuʋudedi si le tsatsam la fia be womeda sɔ o. Zi geɖe la, ʋuʋudedi si dzɔna le vome fiaa be woɖea asi le eŋu alo le kadodo me le ɣeyiɣi aɖewo me. Ʋuʋu si nɔa te ɖe duƒuƒu dzi ate ŋu afia be gbeɖiɖi ƒe ɖiɖi alo ʋukuku ƒe nyawo.
- Dzesi gbãtɔ: ɣekaɣie ʋuʋudedia dzea egɔme?
- Ʋuʋu ƒe ɖoɖo evelia: tsatsam, le vome, alo esi do ƒome kple duƒuƒu?
- Ŋutilã me nusi gbɔ wòtso etɔ̃lia: buildup, bearings, looseness, alo alignment?
- Ðɔɖɔɖo enelia: kɔ eŋu, nàblae sesĩe, agbugbɔ aɖoe ɖe ɖoɖo nu, ami amie, alo aɖɔlii.
Le ƒuƒoƒo siwo kpɔa mɔdodowo kple kɔkrit dɔwo dzi siwo keke ta wu gome la, dɔwɔnu siwo sɔ léle ɖe beléle na wo ƒe dekɔnu ɖeka me kpena ɖe dɔwɔwɔ ƒe ɣeyiɣi bliboa ŋu. Ʋu siwo woɖo ɖe ɖoɖo nu ɖe teƒea ƒe dɔwo ŋu, tso tsakatsaka dzi va ɖo eƒoƒo ɖe enu dzi va ɖo ewuwu dzi la gbɔ kpɔkpɔ le bɔbɔe wu elabena dɔwɔlawo dea dzesi ʋuʋudedi si mesɔ o kaba eye wogblɔa eŋu le nya siwo ƒo xlãe nu.
Nyabiasewo ƒe Nyabiasewo
Nukatae nye kɔnkrit tsakatsaka la ʋuʋuna ne ele ƒuƒlu?
Zi geɖe la, ʋuʋu ƒuƒlu fiaa mɔ̃wo ƒe masɔmasɔ, bearing siwo vuvu, xɔtunu siwo le gbadzaa, alo xɔtunu si megasẽna o. Ne kuxia li ne nu aɖeke mele kpẽa me o la, ke anɔ eme be xɔtuɖaŋu mee dzɔtsoƒea tso wu esi do ƒome kple agba.
Ðe kɔnkrit sesẽ si le kpẽa me ate ŋu ana wòaʋuʋua?
Ɛ̃. Nusiwo ƒo ƒu sesĩe la trɔa nusi le tɔtrɔm la ɖa le titina eye wòhea dadasɔmakpɔmakpɔ enuenu vɛ. Nu sue aɖe si ƒo ƒu gɔ̃ hã ate ŋu ahe ʋuʋu sesẽ vɛ ne ebɔbɔ nɔ adzɔge tso afisi wòtrɔna le.
Ðe wòle dedie be nàyi edzi anɔ mixer si ʋuʋuna akpa zãma?
Ao, ʋuʋu fũ ate ŋu ana bearing la nagblẽ kabakaba, ana nusiwo wotsɔ blaa nu la naɖe asi le eŋu, agblẽ nu le ʋua ƒe mɔ̃a ŋu, eye wòahe dɔwɔla ƒe dedienɔnɔ ƒe afɔku vɛ. Ele be woatɔ mɔ̃a ahalé ŋku ɖe eŋu hafi ayi edzi azãe.
Nukae nye nu gbãtɔ si woakpɔ le mixer vibration fix me?
Kpɔe ɖa be kpẽa ƒo ƒu hã, emegbe nàlé ŋku ɖe bolts, mounts, kple support level ŋu. Nu mawoe nye esiwo ŋu woɖoa kpee kabakaba wu eye zi geɖe la, wokpɔa kuxia gbɔ evɔ womedzraa wo ɖo vevie o.
Aleke mawɔ anya ne bearing-awoe nye kuxia?
Di dzoxɔxɔ, tɔtrɔ kpata, toɣliɖeɖe, kple shaft fefe. Ne bearing-xɔa xɔ dzo wòdze ƒã alo kpẽa se le eɖokui me be yevuvu ne wotsɔ asi trɔe la, woate ŋu ado bearing-awo.
Ðe agba tsɔtsɔ fũu akpa na mixer la hea ʋuʋudedi vɛa?
Ɛ̃. Agba tsɔtsɔ fũ dzia torque ƒe didi ɖe edzi eye ate ŋu ana ememe masɔmasɔ kple agba ƒe tɔtrɔ nasẽ ɖe edzi. Enaa nuteɖeamedzi nɔa bearing, belt, kple frame ƒe kadodowo hã dzi.
Ɣekaɣie wòle be maɖɔli mixer la tsɔ wu be madzrae ɖo?
Tsɔe ɖɔ li ne xɔtunua gbã, kpẽa alo ʋuƒoa vuvu vevie, alo ʋuʋudedi gatrɔna le eŋu ne wokɔe, wotsɔe sɔ kple wo nɔewo, eye woɖɔli eƒe akpa aɖewo gɔ̃ hã. Zi geɖe la, ne mɔ̃a do kpo nu enuenu la, efia be mɔ̃a ɖo eƒe dɔwɔwɔ ƒe agbenɔƒe ŋutɔŋutɔ ƒe nuwuwu.
