- Ni sirada la bɔgɔdaga fitininw don, tamping rammer bɛ baara kɛ ka tɛmɛ plate compactor kan yɔrɔw la minnu sirilen don, yɔrɔ minnu bɛ se ka jɔ.
- Dugukolo suguya nafa ka bon : a ka c’a la, kɔfayi min bɛ ɲɔgɔn kan ani min ɲagaminen don, o bɛ jaabi ɲuman di ni bɔgɔdaga sɔgɔli ye ka tɛmɛ minɛnw kan minnu bɛ kɛ ni yɛrɛyɛrɛ dɔrɔn ye.
- Compaction quality ka kan ka jateminɛ ni density results ye, lift thickness, ani access conditions, a man kan ka jateminɛ ni motɛri hakɛ dɔrɔn ye.
- Lakanali, manɛwɛri, ani baarakɛcogo nafa ka bon i n’a fɔ fanga bɔli sirada la bɔgɔdaga baara la.
Best tamping rammer machine for roadside trench compaction ye ɲininkali ye min bɛ se ka kɛ, a tɛ kɛ fɛn ɲinini dɔrɔn ye, bawo jaabi ɲuman bɛ bɔ bɔgɔdaga bonya la, kɔkanna falenfɛnw na, ani density laɲiniw na. Nafolo ni sira dilan baara la, a ka c’a la, ɲɔgɔndan baarakɛcogo bɛ suman ka kɛɲɛ ni poroze ka ɲininiw ye ni sɛgɛsɛgɛli kɛcogo jɔnjɔnw ye i n’a fɔ ASTM D1556 ye ani ASTM D6938 ye , k’a sɔrɔ minɛnw sugandili ka kan ka kɛ sababu ye ka bɔgɔdaga yɛrɛ ka donko gɛlɛyaw jira. OSHA fana bɛ baarakɛlaw hakili jigin ko bɔgɔdaga lakanani ye bolodako ye, a tɛ miiri kɔfɛ, a ka sɛgɛsɛgɛli ɲɛminɛni kɔnɔ at OSHA ka sɛgɛsɛgɛliw . Ka ɲɛsin baarakɛlaw ma minnu bɛ sugandili kɛ a tamping rammer ye , kelen plati compacteur (plate compacteur) ye , walima a tigɛtigɛ saw dilancogo sinsinni kama, a kunba ye ka masinw jateminɛcogo bɛn bɔgɔdaga ma, o kɔfɛ, ka ɲɔgɔndan sɛgɛsɛgɛ ni foro kunnafoniw ye minnu bɛ se ka suman.
Tamping Rammer Machine Sugandili ka ɲɛsin sirada la trench Compaction ma
Tamping rammer masin min ka fisa sirada la bɔgɔdaga sɔgɔli kama, o ye min bɛ se ka baara kɛ bɔgɔdaga kɔnɔ k’a sɔrɔ a ma bɔgɔdaga kɛ a dakunw kan. Nafamafɛnw ka bɔgɔdaga fitininw, sira tigɛyɔrɔw, kamankunw dilancogo, ani pibilikiw kɔfɛyɔrɔw, tuma caman na, u bɛ baarakɛcogo dɔgɔya kojugu walasa plati compactor ka se ka degun kelen kɛ kɛrɛw la. Trench rammer bɛ fanga don sanbara yɔrɔ fitinin dɔ la, o min bɛ o fɛn dɛmɛ ka siri ɲɔgɔn na layini ni layini sanni a ka sanfɛla yɛrɛyɛrɛ dɔrɔn.
O danfara in nafa ka bon bawo a ka c’a la, bɔgɔdaga kɔkanna dɛsɛ bɛ daminɛ dakunw na, yɔrɔ minnu na, sirili jugu ni lift compaction (lift compaction) bɛrɛbɛrɛ bɛ sigili siraw lawuli. Sirako baara la, sigili musaka ka bon: degun fitinin bɛ se ka kɛ sababu ye ka ji don, ka segin-ka-bɔnye kɛ, ani ka sirako ɲininkaliw kɛ. O de kama, kurunbolilaw ka teli ka baara kɛ ni tamping rammer ye yɔrɔw la minnu ka gɛlɛn kosɛbɛ ani plate compactor (plate compactor) ye lift da wulilenw kama ni clearance (yɔrɔ bɔli) ɲɛnabɔra.
| Masina suguya | Baarakɛyɔrɔ min bɛ kɛ cogoya la | Fɛn min ka fisa ni bɛɛ ye | Nafa fɔlɔ min bɛ yen | Dantigɛli |
|---|---|---|---|---|
| Tamping rammer ye | Fogonfogon fitininw, dakunw, nafama tigɛyɔrɔw | Backfill min bɛ ɲɔgɔn sɔrɔ ani min ɲagaminen don | Kɔnɔnafiliba bɛ yɔrɔ datugulenw na | Aw bɛ dɔɔni dɔɔni yɔrɔ dafalenw na |
| Plate compacteur (Dɔgɔtɔrɔso min bɛ kɛ ni plati) ye | Sira kamankunw, subbase, kɔfaga min ka bon | Fasa granulaire ni blended | Datugulan hakɛ min ka bon | Kɛrɛfɛla doncogo jugu |
| Taama-kɔfɛ-kurunba | Layini dafalenw, yɔrɔ minnu ka bon | Base ni subbase layɛrɛw | A bɛ nafa sɔrɔ yɔrɔw la minnu ka bon | A tɛ se ka don bɔgɔdaga fitininw kɔnɔ |
Mun na sirada la bɔgɔdaga sɔgɔli mago bɛ fɛɛrɛ wɛrɛ la
Sira kɛrɛfɛ bɔgɔdaga sɔgɔli ka gɛlɛn ka tɛmɛ yɔrɔ bɛɛ lajɛlen sɔgɔli kan bawo baarakɛyɔrɔ bɛ gɛlɛya, a sanfɛla tiɲɛna kaban, wa a laban ka kan ka siraba doni dɛmɛ joona. Sira kɛrɛfɛ bɔgɔdaga fana, a kɛrɛfɛ dɛmɛ tɛ kelen ye, ji hakɛ bɛ Changé, wa a farati ka bon ka a sɔgɔ kojugu nafamafɛnw kɛrɛfɛ minnu suturalen don walima ka a sɔgɔli barikama kɛ bɔgɔdaga kogo kɛrɛfɛ. O faralen ɲɔgɔn kan, o kɔrɔ ye ko kurun kɔnɔ baarakɛlaw mago bɛ fanga kɔrɔsilen na, u mago tɛ masin girinya caman dɔrɔn na.
Sira dilancogo ɲɛfɔli fanba bɛ kɔkannafɛnw camanba de wajibiya walasa ka poroze density laɲiniw dafa, a ka c’a la, o bɛ fɔ ka kɛ kɛmɛsarada la jalen hakɛ maksimali ye min latigɛra laboratuwari kɔnɔ. Laboratowari ka kunnafoni jɔnjɔn min bɛ dugukolo sɔgɔli kan, o ye ASTM D698 ye ka ɲɛsin Standard Proctor sɛgɛsɛgɛli ma ani ASTM D1557 ye ka ɲɛsin Modified Proctor sɛgɛsɛgɛli ma. Tiɲɛ na, siwili bɛnkansɛbɛn caman bɛ forow sɔgɔli laɲiniw ɲɛfɔ 95% lamini na laboratuwari jalen hakɛ maksimali la, nka wajibi tigitigi ka kan ka tugu poroze sɛbɛnw kɔ tuma bɛɛ. O la, masin ka kan ka dɛmɛ don ka segin-ka-bɔ-yɔrɔ-kɔrɔta-danfara dɛmɛ, kɛrɛnkɛrɛnnenya la sanfɛyɔrɔw la, sigiyɔrɔ bɛ ye joona yɔrɔ minnu na.
| Tàyɔrɔ | A bɛ min suman | Mun na a nafa ka bon bɔgɔdaga baara la |
|---|---|---|
| ASTM D698 ye | Standard Proctor ka densité jalen maksimali | Baseline for common fill compaction laɲiniw |
| ASTM D1557 ye | Modified Proctor ka densité jalen maksimali | A bɛ kɛ ni compaction energy (dafalen fanga) caman de ka kan |
| ASTM D6938 ye | Densité in-place ni nucléaire gauge | Foro sɛgɛsɛgɛli teliya la density sɔrɔlen kan |
| ASTM D1556 ye | Cɛmancɛ forow ka density | Sɛgɛsɛgɛli fɛɛrɛ wɛrɛ min bɛ kɛ ka fasa compacted |
Trench Rammer ɲuman sugandi cogo min na i ka baarakɛyɔrɔ la
A ka c’a la, sirada la baarakɛlaw bolo, trench rammer min ka fisa, o ye masin ye min bɛ bɔgɔdaga fanga, sanbara hakɛ ani baarakɛla ka kɔlɔsili kɛcogo bɛn ɲɔgɔn ma. Motɛri bɔli ka caya, o nafa ka bon, nka o kɔrɔ tɛ a yɛrɛma ko a bɛ se ka sɔgɔsɔgɔ ka ɲɛ tigɛyɔrɔ fitinin dɔ la. Min nafa ka bon kosɛbɛ, o ye masin ka se ka segin-ka-bɔnyew lase ɲɔgɔn ma k’a sɔrɔ a ma pan ka bɔ a jɔyɔrɔ la walima ka bɔgɔdaga kogo tiɲɛ.
Motɛri kalasi nafa ka bon hali bi bawo a bɛ nɔ bila muɲuli la, sɛnɛfɛnw tacogo la, ani a ladonni waatiw la. Gazoli bɛ baara kɛ ni trench rammers caman ye minnu bɛ kɛ siwili baara nɔgɔmanw na, olu bɛ bin 2 fo 5 hp class kɔnɔ, k’a sɔrɔ compacteurs gɛlɛnw bɛ se ka baara kɛ ni motɛri belebelebaw ye walasa ka baara kɛ waati jan kɔnɔ. Siti ɲɛmɔgɔ dɔw bɛ gazi fɛ walasa u ka se ka taama ani ka sɛnɛfɛnw falen nɔgɔya, dɔw bɛ dizili sugandi yɔrɔ minnu na sɛnɛfɛnw ladonni ni u boli waati nafa ka bon. Desizɔn ɲuman bɛ bɔ bɔgɔdaga lamini na, a tɛ bɔ motɛri suguya dɔrɔn na.
| Sugandili kɛcogo | Ladilikan nafama | Mun na o nafa ka bon |
|---|---|---|
| Trench (bɔgɔdaga) bonya | Aw bɛ sanbara dɔ sugandi min bɛ yɔrɔ to kɛrɛfɛla la | A bɛ bridge ni missed edges bali |
| Dugukolo suguya | Aw bɛ baara kɛ ni impact compaction ye walasa ka fasa jɛlen walima fasa ɲagaminen | A bɛ fɛnɲɛnamafagalanw labɛncogo kura ɲɛ |
| Aw bɛ a janya kɔrɔta | Aw bɛ ɲɔgɔn kɛ lifatan finmanw na sanni aw ka bila yɔrɔ finmanw na | A bɛ dɔ bɔ yɔrɔ lakolonw minɛlenw na |
| Operatɛri ka kunnafoni | A ka fisa a girinya hakɛ bɛ bɛn ani a bolokɔni jaabi sabatilen | A bɛ tiɲɛni ɲɛ ka taa a fɛ yɔrɔw la minnu sirilen don |
| Ladonni sɔrɔli | Aw bɛ fiɲɛbɔlan, bɔgɔdaga ani sanbara don yɔrɔw lajɛ | A bɛ dɔ bɔ baarakɛbaliya waati la mobili dilan baara la |
Ni aw ka baara fana bɛ kɛ ni kamankun dilancogo ye min ka bon walima patɔrɔn yɔrɔw, aw bɛ rammer ni a sira tigɛbaga ka ɲɛsin bɔgɔdaga dakun saniyalenw ma ani a fanga bɔrɔ ka da a kan kɛrɛfɛ slab finishing bɛ se ka dilancogo bɛɛ lajɛlen ɲɛ ka taa a fɛ. Minɛnw bolodacogo ɲuman tɛ masin kelen ye baara bɛɛ kama; o ye wale ye min bɛ kɔrɔsi k’a ta tigɛ la ka taa a bila kɔfɛla la ka taa a bila dugukolo sanfɛla labɛnni na.
Dugukolo cogoya jumɛnw bɛ Tamping Rammer Machine fɛ
Tamping rammer bɛ baara kɛ ka ɲɛ ni fasa bɛ ɲɔgɔn sɔrɔ ka ɲɛ walasa ka jaabi di ni a bɛ segin-ka-bɔ ani ni ji bɛ a la ka se ka ɲɔgɔn minɛ k’a sɔrɔ a ma pɔnpe kɛ. Kɔfɛ-falen ɲagaminen, bɔgɔ cɛncɛn, bɔgɔ nɔgɔlen, ani nafama bɔgɔdaga ɲagaminenw ka teli ka jaabi ɲuman di rammer ma ka tɛmɛ plati yɛrɛyɛrɛli kan, kɛrɛnkɛrɛnnenya la ni bɔgɔdaga ka dun ani kogow bɛ dan sigi kɛrɛfɛla lamaga la. O ni ɲɔgɔn cɛ, fɛn sanuman minnu bɛ kɛ ni granulaire ye, n’u bɛ sɛgɛsɛgɛli kɛ min ka bon, tuma caman na, olu bɛ se ka sɔgɔ joona ni plati compacteur ye.
Dugukolo nɔgɔ ye foro ɲɛtaa sababuba ye. A jalen don kojugu, wa a fɛn bɛ se ka densification kɛlɛ; a ɲiginnen don kojugu, wa fasa bɛ se ka wuli walima ka nɔgɔya ni a gosili siɲɛ caman. Laɲini waleyali ye ka fasa bila ji hakɛ ɲuman kɛrɛfɛ min jiralen don laboratuwari sɔgɔli kurulen kɔnɔ, o kɔfɛ ka a siri wulicogo kɔrɔsilenw na. O fɛɛrɛ bɛ dɔ bɔ baara seginni na ani ka kurun kɔnɔ baarakɛlaw dɛmɛ u ka se density ma joona ni tɛmɛsira damadɔw ye.
- Aw bɛ baara kɛ ni tamper ye ni doncogo dan ye ani ni kɛrɛfɛla sɔgɔli nafa ka bon kosɛbɛ.
- Aw bɛ baara kɛ ni fɛn kɔrɔtalanw ye minnu ka fin ni kɔfagalanw bɛ ni finmanw ye walima ni ji caman bɛ ɲɔgɔn ta.
- Aw bɛ yɔrɔ nɔgɔlenw lajɛ kɔrɔta kelen-kelen bɛɛ kɔfɛ sani aw ka layini nata bila.
- Aw bɛ aw yɛrɛ tanga ji datuguli ma ka bɔ bɔgɔdaga kɔnɔ ni a yɔrɔ sɔgɔli teliya kojugu.
Foro baara kɛcogo sirada la bɔgɔdaga sɔgɔli kama
Foro jaabi ɲumanw bɛ bɔ ɲɔgɔndan nɔgɔman na: tigɛ saniyalen, facogo kɔrɔsilen, sumanikɛlan sɔgɔli, ani sɛgɛsɛgɛli teliya la. Sirada la baara la, kɔfɛla teliya ye kɔfɛ sigili sababu dɔ ye. Baarakɛlaw ka kan ka fɛnw bila cogo kelen na, ka wulilan kelen-kelen bɛɛ lajɛlen kɛ ɲɔgɔn na, ani k’a jira ko bɔgɔdaga tɛ yɔrɔ lakolonw bɔ sirada la walima siraba da kɛrɛfɛ.
Baarakɛcogo min bɛ ɲɛnabɔ ka ɲɛ, o fana bɛ dɔ bɔ masinw tali la. Baarakɛlaw minnu b’a ɲini ka bɔgɔdaga dɔ wajibiya ka tɛmɛ wulilan belebelebaw fɛ, tuma caman na, u bɛ motɛri baara kojugu, ka dɔ fara sanbara sɛgɛn kan, ka bɔrɔw to duguma yɔrɔ la minnu ma degun. Fɛɛrɛ min ka ɲi kosɛbɛ, o ye ka ɲɔgɔndan kɛ tɛmɛsira la minnu bɛ bɛn ɲɔgɔn ma, minnu bɛ ɲɔgɔn dafa, ani minnu bɛ se ka tugu ɲɔgɔn kɔ ni ɲɛ ye.
- Aw bɛ bɔgɔdaga lajɛ ni kɛrɛfɛ kogow, ji walima nɔgɔw tɛ sabati.
- Aw bɛ backfill bila finmanw na, hali lifts ka kɛɲɛ ni poroze spec ye.
- Aw bɛ a siri ka bɔ dakunw na ka taa cɛmancɛ fan fɛ walasa ka kɛrɛfɛyɔrɔw dɔgɔya.
- Aw bɛ density sɛgɛsɛgɛ ni foro sɛgɛsɛgɛli fɛɛrɛ ye i n’a fɔ ASTM D6938 walima ASTM D1556.
- Aw bɛ a yɔrɔ dilan dɔrɔn ni laɲini density sɔrɔla.
| Baara kɛcogo taabolo | Misali min bɛ kɛ tuma caman na | Degeli ɲuman |
|---|---|---|
| Backfill bilali | Ka fɛnw bɛɛ fili siɲɛ kelen | Aw bɛ lifatan kelenw bila |
| Compaction (dafalen) ye | Baara kɛ ni tɛmɛsira damadɔw ye kojugu | Baara kɛ ni tɛmɛsira minnu bɛ se ka segin ɲɔgɔn kan, olu bɛ ɲɔgɔn dafa |
| Sɛgɛsɛgɛli | Ka i jigi da sɛgɛsɛgɛli ɲɛnama dɔrɔn kan | Aw bɛ baara kɛ ni density testing ye |
| Surface (yɔrɔ) labɛnni | Fini ka sɔrɔ ka sigikafɔ farati bɔ yen | A dafalen don compaction kɔfɛ, a sɛgɛsɛgɛra |
Technical Specs minnu nafa ka bon Tamping Rammer kɔnɔ
Tamping rammer masin min ka fisa sirada la bɔgɔdaga sɔgɔli kama, o ɲɛfɔlen don ni fɛɛrɛ jate damadɔw ye minnu bɛ nɔ bila foro kɔlɔsili la k’a ɲɛsin a yɛrɛ ma. Kɔnɔnafili kɛcogo, sanbara hakɛ, baarakɛcogo girinya, ani taama jaabi nafa ka bon ka tɛmɛ masirifɛnw kan. Ramɛri fitinin dɔw minnu bɛ kɛ sira dilan baara la, olu bɛ baara kɛ ni fiɲɛ 600 fo 700 ɲɔgɔn ye miniti kelen kɔnɔ, o bɛ masin dɛmɛ ka fanga jiginni teliya la yɔrɔ fitininw na. Nafa tigitigiw bɛ danfara ka kɛɲɛ ni modɛli ye, nka baarakɛla ka kan ka cadence sabatilen ɲini, min bɛ se ka segin-ka-bɔ sanni ka teliya hakɛ dantɛmɛnen dɔrɔn de ɲini.
Baarakɛlaw mago bɛ masin na fana min bɛ se ka ɲɛnabɔ baarakɛwaati janw na. Rammer min ka nɔgɔn, o bɛ se ka nɔgɔya ka manɛw kɛ sirada tigɛyɔrɔw la ani sirako kɔlɔsili barikalanw lamini na, k’a sɔrɔ fɛn min ka gɛlɛn, o bɛ se ka dɛmɛ ni a ka gɛlɛn ka bɔgɔdaga fɛnw densize. Balannako de ye ko latigɛlen ye: a ka nɔgɔn kojugu, wa masin bɛ tɛmɛ; a girinya kojugu, wa a bɛ gɛlɛya ka jɔ tigitigi da fitinin dɔ la.
| Spec | Foroko nafama min bɛ kɛ cogoya la | Fɛn minnu ka kan ka lajɛ |
|---|---|---|
| Kɔnɔnafili kɛcogo caman | Kuwati jiginni hakɛ | Consistance under load |
| Sanbara bonya | Datugulan bɛ kɛ bɔgɔdaga fitininw kɔnɔ | Edge sɔrɔli ani a bɛ ɲɔgɔn dafa |
| Opereli girinya | Operatɛri ka kɔlɔsili ni doncogo | A minɛcogo nɔgɔya sirada la |
| Seko ni dɔnko sɔrɔyɔrɔ | Fuel logistique ani boli waati | Gazoli walima dizili sɔrɔli |
Baarakɛlaw fɛ minnu bɛ kurunba jɔ, a bɛ se ka kɛ nafa ye ka rammer dɔ suma ni site masin wɛrɛw ye i n’a fɔ bɛton ɲagaminenw ka ɲɛsin patɔrɔn labɛnni ma ani platiw (plate compacteurs) minnu bɛ kɛ ka ɲɛsin basigiyɔrɔw ma minnu ka bon. A ka c’a la, kurunba minnu bɛ nafa caman lase mɔgɔw ma, olu ye kurunba ɲagaminenw ye, kurunba minnu tɛ baara kɛ ni kun kelen ye.
Misali minnu ka teli ka kɛ sirada la bɔgɔdaga sɔgɔli la
Trench compaction dɛsɛ fanba bɛ bɔ baarakɛcogo filiw la, a tɛ bɔ masin yɛrɛ la. Gɛlɛya min ka teli ka kɛ, o ye ka fasa bila ka caya kojugu walasa minɛnw ka se ka densify pewu. Ko wɛrɛ min bɛ kɛ tuma caman na, o ye ka baara kɛ ni plati compacteur ye, yɔrɔ min na bɔgɔdaga ka surun kojugu fo a dakunw tɛ se ka fanga kelen sɔrɔ. Misali sabanan ye ka tɛmɛ density verification kan bawo surface bɛ i ko a jɔlen don tɛmɛ kelen walima fila tɛmɛnen kɔfɛ.
Jiko fili fana nafa ka bon o cogo kelen na. Kɔfɛla jalen bɛ se ka kɛ i n’a fɔ a sabatilen don ɲɔgɔndan waati, wa a bɛ sigi kɔfɛ hali bi ni siraba doni walima sanji ye ji cogoya Changé. Fali jilama bɛ se ka kɛ i n’a fɔ a bɛ se ka baara kɛ nka a tɛ se ka sɔgɔli fanga ɲuman sɔrɔ. Baarakɛla min bɛ se ka da a kan, o bɛ jiko kɔlɔsili jate i n’a fɔ fɛnw sɔgɔli dɔ, a tɛ kɛ fɛɛrɛ danfaralen ye.
- Aw kana lifatan belebelebaw siri ɲɔgɔn na walasa ka waati tiɲɛ dɔrɔn.
- Aw kana a miiri ko yɔrɔ gɛlɛn kɔrɔ ye densité dafalen ye.
- Aw kana aw ɲɛmajɔ kɛrɛfɛyɔrɔw la minnu bɛ bɔgɔdaga da kɛrɛfɛ.
- Aw kana dugukolo sanfɛla seginni to yen fo sigili ka daminɛ.
Lakanali ni sariya labatoli Trench Rammer baara kama
Lakanali ye masinw sugandili yɔrɔ koloma ye bawo sirada la bɔgɔdaga baara bɛ minɛnw lamagacogo, da wulilenw sɛgɛsɛgɛli, ani foroba sirako jirali fara ɲɔgɔn kan. OSHA ka sɛgɛsɛgɛli ɲɛminɛni na OSHA ka sɛgɛsɛgɛliw bɛ sinsin lakanani siraw kan, dugukolo danfara, ani sɔrɔli lakananenw kan, o bɛɛ bɛ nɔ bila baara kɛcogo ni waati min na, n’o ye trench rammer ye. Tiɲɛ na, masin fitinin min ka baarakɛcogo bɛ se ka fɔ ka ɲɛ, a ka c’a la, o farati ka bon ka tɛmɛ baarakɛminɛn girinman kan, min kɔlɔsili ka gɛlɛn a da kɛrɛfɛ.
Baarakɛlaw ka kan fana ka mankan, yɛrɛyɛrɛli, ani baarakɛlaw ka sɛgɛn jateminɛ dilan baara janw senfɛ. Masina min daminɛ ka nɔgɔn, min bɛ to ka taama, ani min baara ka nɔgɔn, a ka c’a la, baara bɛ kɛ ni o ye cogo bɛnnen na. O nafa ka bon bawo minɛn ɲumanw minnu bɛ kamiyɔn dilan na, nafa tɛ olu la ni baarakɛlaw y’u yɛrɛ tanga o ma k’a sababu kɛ a minɛcogo gɛlɛn ye.
Sanni bilasiralikan min bɛ kɛ baarakɛlaw ni feerekɛlaw ye
Tamping rammer masin ɲuman min bɛ sirada la bɔgɔdaga sɔgɔli kama, o fana ye masin ɲuman ye min bɛ to ka boli foro kɔnɔ. Sannikɛlaw ka kan ka fɛnw sɔrɔcogo jateminɛ, ka fɛnw sɛgɛnnenw cili, ani ka baara dɛmɛni jateminɛ ka fara fɛɛrɛko baarakɛcogo kan. Jagokɛlaw fɛ, feereli yɔrɔ tɛ rammer yɛrɛ dɔrɔn ye, nka a bɛ bɛn siradilan baarabolodalenba ma min bɛ se ka kɛ fana ka tigɛ, ka fɛnw sɔgɔ ani ka dugukolo sanfɛla labɛn.
Dugukolo kan sannikɛlaw fɛ, o baarakɛcogo miirili nafa ka bon kɛrɛnkɛrɛnnenya la bawo sira ladonni jɛkuluw mago bɛ kuran labɛncogo jɛlen na tuma caman na baarakɛyɔrɔw cogoya wɛrɛw kama. Minɛn nafama jɛɲɔgɔn ye min bɛ se ka dɛmɛ don bɔgɔdaga sɔgɔli, dakun tigɛcogo, ani a seginni na sanni kɛcogo kelen kɔnɔ. O de y’a to fɛn dilannenw denbayaw i n’a fɔ platiw (plate compacteurs) minnu bɛ kɛ , sira tigɛlaw , ani fanga-baarakɛminɛnw nafa ka bon i n’a fɔ rammer yɛrɛ sanniko latigɛw la.
FAQ Tamping Rammer Machine kan ka ɲɛsin sirada la trench Compaction ma
Yala tamping rammer ka fisa ni plate compactor ye fogonfogon fitininw kama wa?
Ɔwɔ, a ka c’a la, tamping rammer ka fisa ni bɔgɔdaga fitininw ye barisa a bɛ se ka se a da sirilenw na ani ka a sɔgɔli kɛ yɔrɔ datugulenw na, yɔrɔ minnu na plati tɛ se ka manɛwɛrɛ kɛ ka ɲɛ.
Dugukolo jumɛn ka fisa trench rammer ma?
Trench rammer bɛ baara kɛ kɛrɛnkɛrɛnnenya la kɔkannafɛnw na minnu bɛ ɲɔgɔn sɔrɔ ani minnu ɲagaminen don, yɔrɔ min na ni a bɛ segin-ka-bɔnye kɛ, o bɛ dɛmɛ ka yɔrɔ lakolonw tiɲɛ ani ka density (dansi) ɲɛ.
Ne bɛ se k’a dɔn cogo di ni bɔgɔdaga in sɔgɔlen don ka ɲɛ?
Fɛɛrɛ min bɛ se ka da a kan, o ye foro sɛgɛsɛgɛli ye, i n’a fɔ ASTM D6938 walima ASTM D1556, sanni ka kɛ yecogo dɔrɔn ye.
Laɲini jumɛn de bɛ kɛ ka caya sirako la?
Porozɛ caman bɛ baara kɛ ni density laɲiniw ye 95% lamini na laboratuwari ka densité jalen maksimali la, nka bɛnkansɛbɛn sɛbɛnw bɛ wajibi yɛrɛyɛrɛ kɔlɔsi.
Yala masin kelen bɛ se ka bɔgɔdaga ni yɔrɔ dafalenw sɔgɔli baara kɛ wa?
Tamping rammer bɛ se ka bɔgɔdaga minɛ ka ɲɛ kosɛbɛ, nka a ka c’a la, yɔrɔ dafalenw bɛ teliya ni plate compactor walima roller ye.
Ladonni yɔrɔ jumɛnw nafa ka bon kosɛbɛ tamper dɔ la?
Fiɲɛ filɛri cogoya, bɔgɔdaga doncogo, sanbara doncogo, ani motɛri daminɛcogo, olu ye fɛnba ye minnu ka kan ka sɛgɛsɛgɛ tuma bɛɛ.
Baarakɛla ka kan ka sugandi cogo di gazi ni dizili cɛ?
Aw bɛ gazi sugandi walasa ka taama nɔgɔya ani ka tulu don a la, ani dizili ni boli waati ni yɔrɔ sɛnɛfɛnw labɛnni nafa ka bon kosɛbɛ.
