Mun na Plate Compactor Vibration bɛ barika dɔgɔya ani a labɛncogo

Barikantan dɔ plati compacteur (plate compacteur) ye bɛ se ka compaction sumaya, ka dɔ fara tɛmɛsira kan, ka basi to min tɛ kelen ye. A ka c’a la, . plati compacteur yɛrɛyɛrɛli bɛ jigin ka da masin, fɛnɲɛnamafagalan walima ladonni ko damadɔw kan minnu bɛ se ka lajɛ ani ka latilen joona.

Mun na Plate Compactor Vibration bɛ barika dɔgɔya

A ka c’a la, taamasiyɛn fɔlɔ ye baara kɛcogo caman yeli ye, a tɛ kɛ dɛsɛ pewu ye. Masina min tun bɛ a yɛrɛ jate mɔgɔ fariman ye fɔlɔ, o bɛ se ka daminɛ ka “jigin” a sanfɛla la, ka taa dɔɔni dɔɔni, walima ka yɔrɔ nɔgɔlenw to yen tɛmɛni kelen-kelen bɛɛ kɔfɛ.

A ka c’a la, yɛrɛyɛrɛ bɔnɛ bɛ bɔ cɛsirilan sɛgɛnnenw na, sirilanw lajɔlen, exciter yɔrɔw tiɲɛnenw, motɛri fanga dɔgɔyali, walima nɔgɔ bɛ bolifɛn bolicogo la. Kibaru duman ye ko gɛlɛya barikama caman bɛ se ka ɲɛnabɔ sani u ka kɛ dilanbaw ye.

Plate Compactor Vibration Loss sababu minnu ka teli ka sɔrɔ

A ka c’a la, a sababu ju ye masinw sɛgɛnni ye walima fanga jiginni dɔgɔyali. Foro baara la, a ka c’a la, fɛɛrɛtigiw bɛ daminɛ ni motɛri, exciter assemblage ani base plate jiginni yɔrɔw lajɛ ye.

Ko filanan min bɛ kɛ tuma caman na, o ye ladonni jugu ye. Bugun, cɛncɛn ani fɛn ɲiginnenw bɛ se ka don o sigida la bɔgɔdaga baara waati walima siraw labɛnni waati, o bɛ dɔ bɔ baarakɛcogo la ani ka sɛgɛn teliya.

Walasa ka masin compact lineup min kɔnɔ plati compacteur modɛliw ani yɔrɔ baarakɛminɛn wɛrɛw, fɛn dilannenw suguya minnu bɛ sosiyete ka yɔrɔ la, olu b’a jira cogo min na fɛnw sɔgɔli minɛnw bɛ bɛn siraba ni bɛton baarakɛcogo belebelebaw ma. ([consmac.com](/fɛn dilannenw-kategori/plate-compacteur/))

Yɛrɛyɛrɛ barikamaw sɛgɛsɛgɛcogo senfɛ-senfɛ

Sɛgɛsɛgɛli sigilen ye gɛlɛya in danfara teliyacogo ye. Aw bɛ a daminɛ ni sɛgɛsɛgɛli nɔgɔmanw ye, o kɔ aw bɛ taa kɔnɔna yɔrɔw la ni ko tora.

• Aw bɛ fɛnɲɛnamafagalan hakɛ, fiɲɛbɔlan cogoya ani motɛri daminɛcogo lajɛ.
• Aw bɛ cɛsirilan tension, cɛsirilan sɛgɛn ani pulley alignment sɛgɛsɛgɛ.
• Aw bɛ numugu lafiyalenw ɲini, lastikuw bilayɔrɔw karilen, walima sirilanw tununen.
• Aw ye lamɛnni kɛ ni a bɛ sɔgɔsɔgɔ walima ka a gosi ka bɔ exciter so kɔnɔ.
• Aw bɛ a lajɛ ni basigilan ma kɔrɔta walima ni a nɔgɔlen don ni fɛn gɛlɛnw ye.

Ni masin bɛ baara kɛ ka ɲɛ nka a bɛ kɛ i n’a fɔ a yɛrɛyɛrɛli barika ka dɔgɔ, a ka c’a la, gɛlɛya bɛ sɔrɔ fanga jiginni na sanni ka kɛ jeni ye. Ni motɛri yɛrɛ bɛ gɛlɛya, yɛrɛyɛrɛ bɔnɛ bɛ se ka kɛ sow fanga dɔgɔyali taamasiɲɛ dɔrɔn ye.

Sirako jɛkulu minnu fana mago bɛ bɔgɔdaga sɔgɔli la, danfara min bɛ baarakɛminɛnw ni ɲɔgɔn cɛ, o nafa ka bon. KELEN tamping rammer ye a ka c’a la, a ka fisa yɔrɔ fitininw na, yɔrɔ minnu datugulen don, ka sɔrɔ plati masin bɛ baara kɛ ka ɲɛ basigiyɔrɔw la minnu ka bon. ([consmac.com](/fɛn dilannenw-kategori/tamping-rammer/))

Cogo min na ka plat compacteur barikama yɛrɛyɛrɛ labɛn

Yɛrɛyɛrɛ barikama ɲɛnabɔli ɲuman ye ka fili nɔgɔman latilen fɔlɔ. O fɛɛrɛ bɛ dɔ bɔ baarakɛbaliya waati la ani ka yɔrɔw caman cili bali minnu tɛ mako ɲɛ.

Labɛn 1: Aw bɛ cɛsirilan bolicogo segin a cogo kɔrɔ la. Ni cɛsirilan bɛ kɛ ni galasi ye, ni a karilen don, walima ni a lajɔlen don, aw bɛ a bila a nɔ na ka a sɔgɔsɔgɔninjɛw labɛn. Slippage ye sababu dɔ ye min ka teli ka kɛ sababu ye ka plate compactor fanga dɔgɔya.

Labɛn 2nan: Baara kɛ ni motɛri ye. Aw bɛ fiɲɛbɔlan saniya walima k’a falen, ka fɛnɲɛnamafagalan kura kɛ, ka buji lajɛ, ani ka a jira ko gazi da wulilen don kosɛbɛ. Motɛri barikama tɛ se ka yɛrɛyɛrɛ sabatilen bɔ.

Labɛn 3nan: Aw bɛ exciter assemblage dilan. Ni birikiw walima yɔrɔ minnu tɛ kelen ye, olu donna, yɛrɛyɛrɛ bɛ kɛ mankan ye ani a tɛ bɛn ɲɔgɔn ma. Nin ye dilan ye min ka dun, nka a ka c’a la, o ye furakɛli ɲuman ye ni kɛnɛma sɛgɛsɛgɛliw ma o ko ɲɛnabɔ.

Labɛn 4nan: Aw bɛ jiginni minɛnw bɛɛ siri. Bolo lafiyalenw minnu bɛ karamɔgɔ walima bololanɛgɛ kan, olu bɛ se ka fanga minɛ ani ka a to a ka kɛ ko fanga tɛ a la. Aw bɛ segin ka sirilanw bɛɛ lajɛ baara gɛlɛnw kɔfɛ.

Sannikɛlaw minnu bɛ masinw denbayaw suma ɲɔgɔn na, CONSMAC fana bɛ yɔrɔ minɛnw di minnu bɛ tali kɛ o la i n’a fɔ jɔli minɛnw ka fɛn dilannenw , i n’a fɔ ɲagamikɛlanw, dugumalanw, ani masin yeelenma wɛrɛw minnu bɛ kɛ bɛton ni sirako porozɛw kɔnɔ. ([consmac.com](/products/))

Ni Plate Compactor mago bɛ a yɔrɔw cili la

Yɛrɛyɛrɛ gɛlɛya dɔw tɛ se ka dilan ni ladilanni dɔrɔn ye. Ni sɛgɛn sera exciter, bearing walima frame joints ma, a ka c’a la, a falenni bɛ kɛ farati ye, wa a musaka ka dɔgɔ.

Ni masin ye yɛrɛyɛrɛ bɔnɛ siɲɛ caman cɛsirilan caman cili kɔfɛ ani motɛri baara kɔfɛ, a bɛ se ka kɛ ko fɛnɲɛnamafagalan bɛ ka surunya a si laban na. Nɛgɛ mankan min bɛ to sen na, funteni bɛ caya, walima tulu bɔli yelen ye lasɔmini taamasiɲɛ barikamaw ye.

Dilanbagaw ka fɛn dilannenw ɲɛw b’a jira ko bi ɲɔgɔndan modɛliw dabɔra sirako ni jusigilan baara baarakɛlaw kama, ni fɛn ɲɛfɔlenw ye i n’a fɔ 14 kN ramming force on rammer units ani CE seereyali fɛn sugandilenw bɛɛ kan, o min b’a jira ko ladonni kɛcogo kɔrɔ nafa ka bon foro baara la. ([consmac.com](/product/maxmach-rm85-fiɲɛ-nɛnɛ-kuran-daminɛ-tampi-rammer/))

Yɛrɛyɛrɛ barikama kunbɛncogo don o don baara la

Bana kunbɛnni ka nɔgɔn ka tɛmɛ dilan kan, kɛrɛnkɛrɛnnenya la yɔrɔw la, yɔrɔ minnu na mɔgɔw ka ca, masin bɛ se ka baara kɛ yɔrɔ minnu na dɔgɔkun kɔnɔ, baarakɛwaati caman kɔnɔ. Fɛɛrɛ surun min bɛ kɛ ka kɔn a daminɛ ɲɛ, o bɛ se ka baara kɛcogo lakana ani ka baara kɛ waati janya.

Ameriki ka baarakɛlaw ka lakana ni kɛnɛyako ɲɛmɔgɔso ka fɔ la, so jɔli minɛnw ka kan ka mara baarakɛcogo la min tɛ mɔgɔ tɔɔrɔ, ani minɛnw tiɲɛni ka kan ka latilen sani u ka baara kɛ ni u ye. ([consmac.com](/products/))

Baarakɛlaw fɛ, o ladonni delina tɛ lakana dɔrɔn ye. A bɛ nafa sɔrɔli fana lakana, bawo a sabatilen plati compacteur (plate compacteur) ye bɛ dɔ bɔ baara seginni na ani ka basigicogo ɲɛ siraw, jusigilanw, ani bɔgɔdaga kɔkannafɛnw na.

Compacteur ɲuman sugandili baara kama

Minɛnw sugandili bɛ nɔ bila yɛrɛyɛrɛ baarakɛcogo la i n’a fɔ ladonni bɛ nɔ bila cogo min na. Masina min ka dɔgɔ kojugu walasa ka fa densi, o bɛna kɛ i n’a fɔ a barika ka dɔgɔ hali n’a bɛ cogo dafalen na.

A ka c’a la, plati masin ka fisa ni cɛncɛn, kabakurun, asphalt patching ani base layers belebelebaw ye. Rammer bɛ se ka kɛ kosɛbɛ bɔgɔdaga fitininw na, pibilikiw lamini na, ani nkɔni sirilenw na, yɔrɔ minnu na plati tɛ se ka baara kɛ ka ɲɛ.

Kulu ɲagaminenw fɛ, o de y’a to fɛn dilanni sira min sinsinnen bɛ furakɛli kan, o nafa ka bon. KELEN plati compacteur (plate compacteur) ye a bɛ da wulilen basigi baara ɲɛnabɔ, k’a sɔrɔ a tamping rammer ye a bɛ tali kɛ compaction (dafalen) baara dantigɛlenw na. ([consmac.com](/fɛn dilannenw-kategori/plate-compacteur/))

Foro sɛgɛsɛgɛli sɛbɛn nafama min bɛ kɛ ka ɲɛsin yɛrɛyɛrɛ barikama ma

Sɛgɛsɛgɛli teliya sɛbɛn bɛ baarakɛlaw dɛmɛ u k’a latigɛ ni masin bɛ se ka to baara la walima ni a ka kan ka ci ka taa a dilan. O bɛ waati kisi baara kɛtaw la minnu bɛ baara kɛ kosɛbɛ, wa a bɛ dɔ bɔ farati la min bɛ se ka kɛ ni ɲɔgɔndɛmɛ jugu ye.

1. Aw bɛ a sɛgɛsɛgɛ ko motɛri sera baarakɛcogo teliya la.
2. Aw bɛ cɛsirilan tension ni pulley alignment lajɛ.
3. Aw bɛ exciter so lajɛ ni funteni, mankan walima tulu bɔra a la.
4. Aw bɛ karamɔgɔ ni bololanɛgɛw bɛɛ siri.
5. Aw bɛ compaction kɛcogo kɔrɔbɔ fɛn dɔnta yɔrɔ dɔ kan.

Ni unit tɛ baara kɛ ka ɲɛ hali bi o sɛgɛsɛgɛliw kɔfɛ, a ka c’a la, gɛlɛya bɛ sɔrɔ kɔnɔna na. O waati la, yɔrɔw sɛgɛsɛgɛli ka fisa ni yɔrɔ baara segin-segin ye.

Kuncɛli

Barikantan dɔ plati compacteur (plate compacteur) ye a ka c’a la, a bɛ gɛlɛya dɔ jira min bɛ se ka ɲɛnabɔ, a tɛ kɛ dɛsɛ banbali ye. Ni baarakɛlaw ye motɛri, bolifɛn cɛsirilan, exciter ani fɛnɲɛnamafagalanw lajɛ ka kɛɲɛ ni u cogo la, baarakɛlaw bɛ se ka u labɛn kokura plati compacteur yɛrɛyɛrɛli teliya la ani ka compaction baara kɛ ka kɛɲɛ ni waati latigɛlen ye.

Ɲininkaliw

1. Mun na ne ka plati compacteur bɛ bɔnɛ a yɛrɛyɛrɛ la yɔrɔnin kelen?
A ka c’a la, ni a jiginna yɔrɔnin kelen, o b’a jira ko cɛsirilan sɔgɔlen don, a sirilan lafiyalen don, walima motɛri ko la. Ni masin tun bɛ baara kɛ ka ɲɛ, o kɔfɛ a barika dɔgɔyara, aw bɛ a daminɛ ni kɛnɛma sɛgɛsɛgɛli nɔgɔmanw ye. Ni o fɛnw ɲɛ ka ɲi, aw bɛ exciter assembly lajɛ ni kɔnɔna sɛgɛn tɛ.

2. Yala motɛri fanga dɔgɔyali bɛ se ka kɛ sababu ye ka yɛrɛyɛrɛ barikama kɛ wa?
Awɔ. Ni motɛri ma se teliya dafalen na, wulilan tɛ se ka fanga nɔgɔman bɔ. Filɛtiri nɔgɔlenw, fɛnɲɛnamafagalan kɔrɔlenw, fiɲɛ gɛlɛyaw, walima gazi koɲɛw, olu bɛɛ bɛ se ka dɔ bɔ bɔli la. Tuma caman na, ni motɛri baarakɛcogo seginna, o bɛ na ni yɛrɛyɛrɛ ye kokura.

3. Ne bɛ se k’a dɔn cogo di ko cɛsirilan de ye gɛlɛya ye?
Taamaʃyɛn minnu ka teli ka ye, olu ye sɛgɛn, kasa jeni, gilasi, walima faraw yelenw. Tuma caman na, cɛsirilan lafiyalen bɛ a to masin mankan bɛ bɔ cogo la nka a bɛ kɛ i n’a fɔ a barika ka dɔgɔ duguma. Ni yɛrɛyɛrɛ bɛ ɲɛ tension ladilan kɔfɛ, a ka c’a la, cɛsirilan de tun ye koba ye.

4. Yala plate compactor ka fisa ni rammer ye trenches kama wa?
A ka c’a la, o tɛ kɛ. Rammer bɛnnen don kosɛbɛ bɔgɔdaga fitininw ni nkɔni sirilenw ma bawo a bɛ nɔ bila yɔrɔ danmadɔw la. A ka c’a la, plati compacteur ka fisa ni basi dafalenw ye, ni asphalt patching ye, ani yɔrɔ minnu ka bon.

5. Tuma jumɛn na ne ka kan ka fɛnɲɛnamafagalan falen sanni ka a dilan?
Aw bɛ wulilan falen ni mankan, funteni kojugu walima yɛrɛyɛrɛ bɔnɛ bɛ to ka segin cɛsirilan ni motɛri baara kɔfɛ. Ni birikiw sɛgɛnna kosɛbɛ walima ni so kɔnɔna tiɲɛna, a ka c’a la, u falenni bɛ se ka da u nɔ na, ​​wa a lakananen don ka tɛmɛ waati dɔɔnin labɛnni kan siɲɛ caman.