Plate compactor ye compacting machine ye min bɛ basigi sabatili ɲɛ ka sɔrɔ ka siraba da, ka slab baara, walima ka kɔfɛ fa. Nin gafe in bɛ a ɲɛfɔ plati compactor bɛ baara kɛ cogo min na, min bɛ nɔ bila compaction jogo la, ani cogo min na daminɛbagaw bɛ se ka baara kɛ n’a ye lafiya la ani cogo ɲuman na.
Plate Compactor Baarakɛcogo sariya: Hakilina jɔnjɔn
Baarakɛcogo sariya ka nɔgɔn: yɛrɛyɛrɛ bɛ dɔ bɔ yɔrɔ lakolonw na, wa plati bɛ o fanga bila duguma. Girinyali eccentrique min bɛ exciter kɔnɔ o bɛ jiginni teliya lase, k’a sɔrɔ basigi-plati girinman bɛ o lamaga in sɛmɛntiya ka kɛ jiginɛ segin-seginw ye ani ka taa ɲɛfɛ.
Tiɲɛ na, masin tɛ dugukolo “sɔgɔsɔgɔ” i n’a fɔ wuluwulu jɔlen. O nɔ na, a bɛ fɛnɲɛnamafagalanw lamaga ka kɛ labɛn sirilen ye, o min bɛ dɔ fara u ka density kan ani ka doni tali seko kan. O de y’a to a bɛ kɛ ka caya bɔgɔmugu, cɛncɛn, kabakurun ani basigiyɔrɔw la ka kɔn asfalt walima paverw ɲɛ.
Tablo min bɛ tali kɛ ɲɔgɔn na: Plate Compactor Action vs. Tamping Rammer Action
| Minɛn | Plaque Compacteur (Plat Compacteur) ye | Tamping Rammer ye baara kɛ |
|---|---|---|
| Lamaga fɔlɔ | Plaque vibrante ni taama tilennen | Jiginni panni-yɔrɔ-ko |
| Fɛn min ka fisa ni bɛɛ ye | Dugukolo granulaire, gravel, cɛncɛn, asphalt basigilen | Dugukolo min bɛ ɲɔgɔn kan, bɔgɔdaga kɔkanna, yɔrɔ fitininw |
| Baara kɛcogo ɲuman | Yɔrɔ dafalenw ani yɔrɔ minnu ka bon | Yɔrɔw ni dakunw datugulenw |
| O kɔlɔlɔ min bɛ sɔrɔ cogoya la | Teliya, hali basigilen compaction | Compaction jugumanba, sigida la |
Daminɛbagaw fɛ, o danfara in nafa ka bon bawo masin jugu bɛ se ka waati tiɲɛ ani ka yɔrɔ barikamaw to. CONSMAC kuluw ye a ka plati compacteur (plate compacteur) ye ani tamping rammer ye layiniw baarakɛyɔrɔ cogoya wɛrɛw kama, o min bɛ tilali jira min bɛ kɛ tuma bɛɛ da wulilen ni bɔgɔdaga baara cɛ.
Plate Compactor bɛ baara kɛ cogo min na dugukolo, kabakurun ani Asphalt kan
Masina bɛ baara kɛ ka ɲɛ ni a fɛn bɛ se ka lamaga ani ka sigi yɛrɛyɛrɛ kɔrɔ. Fɛnɲɛnɛmaw i n’a fɔ cɛncɛn ni kabakurun mugulenw bɛ jaabi ɲuman di bawo fɛnɲɛnamafagalanw bɛ se ka u ɲɛsin ɲɔgɔn ma kokura ani ka u datugu ɲɔgɔn fɛ yɛrɛyɛrɛli segin-seginw senfɛ.
Asphalt ni basigi labɛnni kama, laɲini ye ka density uniforme sɔrɔ sani surface ka nɛnɛ walima ka layɛrɛ nata bila. FHWA y’a jira ko yɔrɔ la, density (dafalen) min bɛ yɔrɔ la, o ye fɛnba ye min bɛ se ka kɛ sababu ye ka asfalt siraba muɲu, wa basigi ni basigi duguma jɔli ɲuman bɛ nɔba bila baarakɛcogo la.
Baara daminɛbagaw ka kan k’u hakili to a la ko ji nafa ka bon i n’a fɔ masin fanga. A jalen don kojugu, wa a fɛnɲɛnamafagalanw bɛ se ka labɛn kokura; a ɲiginnen don kojugu, wa a basigilen bɛ se ka pɔnpe walima ka a tiɲɛ. A ka c’a la, a nɔ ɲuman bɛ bɔ fɛn na min bɛ gɛrɛ jisuma na min ka ɲi poroze ɲɛfɔli kama.
Kɛrɛnkɛrɛnnenya la, fɛn minnu bɛ kɛ ka ɲɛsin daminɛbagaw ka ɲɔgɔndan bolodacogo ma
| Paramɛtiri | Practical Daminɛbagaw ka Range | Mun na a nafa ka bon |
|---|---|---|
| Aw bɛ a janya kɔrɔta | 6-12 in. / 15-30 santimɛtɛrɛ | Lifti minnu ka bon, olu ka gɛlɛn ka densify cogo kelen na |
| Yɛrɛyɛrɛli kɛcogo | 3000-6000 ɲɔgɔn vpm | Baarakɛyɔrɔ min bɛ kɛ tuma caman na walasa ka yeelen sɔgɔli baara kɛ |
| Tɛmɛnen bɛ layɛrɛ kelen-kelen bɛɛ la | A ka c’a la, 3-6 bɛ tɛmɛ | A bɛ dɛmɛ ka density uniforme jɔ k’a sɔrɔ a ma baara kɛ kojugu surface la |
| Compaction (daminɛ) jugumanba | Tuma caman na 4-12 in. / 10-30 cm, a bɛ bɔ fɛnw na | Dugukolo dunuya bɛ bɔ dugukolo suguya la, nɔgɔ la, ani masin girinya la |
O nafaw ye daminɛ nafamaw ye, u tɛ diɲɛ bɛɛ ka sariyaw ye. Lift dan lakikaw ka kan ka tugu poroze ka ɲɛfɔli la, wa baarada dɔw bɛ sira di kalansenw ma minnu ka bon ni foro kɔnɔ sɛgɛsɛgɛliw y’a jira dɔrɔn ko minɛnw bɛ se ka density sɔrɔ u juguya bɛɛ fɛ.
Baara daminɛcogo minnu bɛ kɛ ka ɲɛsin Plate Compactor ma
Baarakɛcogo lakananen bɛ daminɛ ni labɛnni ye, a tɛ daminɛ ni daminɛ juru samali ye. Aw bɛ fɛnɲɛnamafagalan, motɛri tulu, plati cogoya, cɛsirilan tension ani a sirilanw lajɛ sani aw ka masin daminɛ, o kɔ aw bɛ nɔgɔ lafiyalenw ni balilan dogolenw yɔrɔ jɛya.
- Aw bɛ yɔrɔ lajɛ ani ka a kɔrɔtacogo jateminɛ.
- Aw bɛ masin bila dugukolo tilennen kan sani aw ka a daminɛ.
- Aw bɛ motɛri boli ni baarakɛcogo teliya la min fɔra.
- Aw bɛ masin ɲɛminɛ tɛmɛsira tilennenw na minnu bɛ ɲɔgɔn kan.
- Aw bɛ a wuli dɔɔni dɔɔni a da la sanni aw ka pivot nɔgɔlen dɔ wajibiya.
- Aw bɛ a jɔ ka segin ka a yɔrɔ lajɛ ni a bɛ daminɛ ka sɔgɔsɔgɔ, ka pan walima ka nɔgɔ.
Daminɛbagaw ka kan ka masin to a yɛrɛ ka lamaga. Ni aw ye a gɛlɛya kojugu, o bɛ dɔ bɔ yɛrɛyɛrɛ jiginni na wa a bɛ se ka kɛ sababu ye ka fɛnw sɔgɔli kɛ cogo kelen na. Taama taamacogo basigilen ni tɛmɛsira minnu bɛ ɲɔgɔn kan, a ka c’a la, o bɛ nɔ bɔ ka tɛmɛ a minɛcogo jugu kan.
OSHA bɛ sinsin baarakɛlaw degecogo kan ani faratiw dɔnni kan compactor minɛnw na, kɛrɛnkɛrɛnnenya la yɔrɔ minnu na farati bɛ se ka kɛ yɔrɔ minnu na rollover walima pinch. So jɔli lakanani sariyaw minnu bɛ 29 CFR Part 1926 kɔnɔ, olu fana bɛ tali kɛ baarakɛyɔrɔw la.
Ka Right Plate Compactor sugandi baara kama
Masina ɲuman bɛ bɔ a yɔrɔ bonya la, a fɛn suguya la, ani baara kɛcogo la. Fɛn min ka nɔgɔn, o ta ka nɔgɔn ka taa ni a ye ani k’a mara, k’a sɔrɔ fɛn min ka gɛlɛn, a ka c’a la, o bɛ fanga barikama di a ma min bɛ fɛnw sɔgɔ ani ka baara kɛcogo ɲuman di fɛnw kɔrɔtacogo ma minnu ka bon walima minnu ka bon.
CONSMAC ka fɛn dilannenw b’a jira cogo min na, feerekɛlaw ka teli ka nin kulu in tila ka kɛɲɛ ni motɛri suguya ye, ka kɛɲɛ ni plati hakɛ ye, ani baarakɛyɔrɔ baarakɛcogo ye. A ka plati compactor ɲɛw kɔnɔ, siraba basigilen, asfalt bɔgɔ, ani bololabaara walima bololabaarakɛlaw ka misaliw bɛ yen, k’a sɔrɔ gafe min ka bon kosɛbɛ, o bɛ bɛton ɲagamilanw, duguma sɔgɔlanw, ani sira tigɛlanw fana ɲɛfɔ.
Sugandili Tablo: Common Plate Compactor Sugandili ka kɛɲɛ ni baara suguya ye
| Baara suguya | Masina jogo min bɛ ladilikan di | Kun min bɛ kɛ cogoya la |
|---|---|---|
| Taama siraw ni kɛnɛbaw | Plate nɔgɔman fo ka se plati cɛmancɛ ma, a minɛcogo ka nɔgɔn | Yɔrɔ misɛnninw mago bɛ kunbɛnni na ka tɛmɛ fanga kɔrɔ kan |
| Siraba basigilen ni bolifɛnw jɔyɔrɔw | Plate min ka gɛlɛn, fanga min ka bon ni centrifuge ye | Yɔrɔ dafalenw mago bɛ datugu teliya la ani ka denso jugumanba sɔrɔ |
| Patch dilancogo ani asphalt prep | Kisɛ ni yɛrɛyɛrɛ balannen | A bɛ dɛmɛ ka hali sanfɛla dɛmɛ sɔrɔ |
| Trench edges ani zone confiné | Tamping rammer sanni ka plate compactor kɛ | Jiginni jɔlen bɛ baara kɛ ka ɲɛ yɔrɔ fitininw na |
Sira ni siraba baara kama, a ka c’a la, plati compacteur bɛ fara ɲɔgɔn kan ni bɛton tigɛlan ye, ni kuran sɔgɔlan ye, walima ni ɲagamikɛlan ye baarakɛcogo dafalen na. O de y’a to baarakɛlaw caman ka fisa ni feerekɛlaw ye minnu bɛ ɲɔgɔndan bɛɛ datugu k’a ta fɛnw labɛnni na ka taa a bila u sanfɛla labɛnni na.
Yɔrɔ min na Plate Compactor bɛ bɛn sira ni duguma baara ma
Masina nafa ka bon kosɛbɛ ni a bɛ jɔli sinsinniba dɔ dɛmɛ. Siraba labɛnni na, a bɛ dugukolo jukɔrɔla-yɔrɔ-ko-minɛnw Dòn ɲɔgɔn na ka sɔrɔ ka siraba Dabɔ. Jagokɛyɔrɔw la, a bɛ dɛmɛ ka basigi sabati siraba doni kɔrɔ. Bɛton walima dugukoloko baara misɛnninw na, a bɛ dɔ bɔ sigiyɔrɔko farati la sani a ka ban.
Dugukolo ni yɔrɔ ladonni jɛkuluw fɛ, fɛnw sɔgɔli ye o baara yɔrɔ kelen dɔrɔn de ye. Surface grinding, floating, cutting, ani line marking bɛ se ka tugu o kɔ ka kɛɲɛ ni poroze ye. CONSMAC ka kuluba minnu ka bon, olu dɔw ye duguma sɔgɔli masin ani duguma sɔgɔlanw ni tigɛminɛnw , minnu bɛ kɛ ka caya basigi labɛnni kɔfɛ walima fɛnw labɛnni baara senfɛ.
Minisiri ka ladonni na, masin in nafa ka bon kosɛbɛ bawo tuma caman na, baarakɛlaw mago bɛ baara teliya la ani baara nɔgɔman na. Unit minnu girinya ka nɔgɔn, olu taama ka nɔgɔn yɔrɔw ni ɲɔgɔn cɛ, wa gazi walima dizili fanga sugandilenw bɛ baarakɛlaw dɛmɛ u ka baara kɛ yɔrɔ minnu na kuran man ca.
Lakanali ni ladonni jɔnjɔnw baarakɛla kuraw ye
Ladonni kɛcogo kɔrɔ bɛ fɛnw sɔgɔli cogoya ni baarakɛla lakanani bɛɛ lakana. Aw bɛ basigilan saniya baara kɛlen kɔfɛ, ka exciter so lajɛ, ka sirilanw lajɛ ni u ma lajɔ, ani ka cɛsirilanw walima lastikuw tiɲɛnenw falen sani aw ka baara nata kɛ.
Lakanali sɛgɛsɛgɛliw ka kan ka kɛ baarakɛyɔrɔ fana na. Aw bɛ bolow ni senw yɔrɔ janya tasa la, aw kana baara kɛ kuluw kan minnu tɛ sabati, ani aw kana baara kɛ ni masin ye abada dakunw walima bɔgɔdaga kɛrɛfɛ minnu lakananen tɛ ni yɔrɔ kɔlɔsili tɛ. OSHA ka compactor bilasiralikan bɛ kalan, sigiyɔrɔ lakananen, ani faratiw dɔnni jira iko kɔrɔsili nafamaw.
Motɛri ladonni fana nafa ka bon. Fiɲɛ filɛriw, buziw, sɛnɛfɛnw hakɛ, ani tulu hakɛ, olu bɛɛ bɛ nɔ bila daminɛ dannaya la ani yɛrɛyɛrɛ cogoya la. Masina min tɛ baara kɛ ka ɲɛ, o ka teli ka kɛ fɛn ye min tɛ ɲɔgɔn minɛ kosɛbɛ, bawo motɛri teliya sabatibali bɛ yɛrɛyɛrɛ bɔli Changer.
Takeaways jɔnjɔnw ka ɲɛsin baarakɛlaw daminɛbagaw ma
Plate compactor baarakɛcogo sariya ye vibration-driven densification ye, a tɛ brute force ye. Daminɛbagaw bɛ nɔ ɲuman sɔrɔ ni u bɛ baara kɛ ni kɔrɔtacogo ɲuman ye, ka fɛn in to ji hakɛ la min bɛ se ka baara kɛ, ani ka tɛmɛsira caman kɛ minnu bɛ ɲɔgɔn dafa walasa ka density kelen dilan.
Baara misɛnniw ni baara cɛmancɛ fanba la, fɛɛrɛ min ka fisa, o ye ka daminɛ ni wulicogo finmanw ye, ka sanfɛla jaabi kɔlɔsi, ka dɔ fara a datugucogo kan dɔrɔn ni layini bɛ ɲɔgɔn minɛ cogo kelen na. Ni fɛn dilannen bɛ ɲɔgɔn na walima ni yɔrɔ ka dɔgɔn, tamping rammer bɛ se ka kɛ sugandili ɲuman ye.
Ni aw bɛ minɛnw sugandi, aw bɛ motɛri baarakɛcogo sabatilen ɲini, girinya min bɛ se ka ɲɛnabɔ, ani plati hakɛ min bɛ bɛn baarakɛyɔrɔ ma. Fɛn dilanbaga min bɛ ni minɛnw ye minnu bɛ tali kɛ ɲɔgɔn na, o fana bɛ se ka baarakɛyɔrɔ labɛnni nɔgɔya bawo, baarakɛminɛn minnu bɛ fɛnw sɔgɔ, ka u ɲagami, ka u ɲagami ani ka u ban, olu ka teli ka baara kɛ i n’a fɔ fɛɛrɛ kelen.
Complementaire Compaction Equipment (minɛn minnu bɛ kɛ ka fɛnw sɔgɔsɔgɔ ɲɔgɔn fɛ) sugandi
Baarakɛlaw minnu bɛ sira walima duguma baarakɛcogo dafalen jɔ, a ka ɲi ka segin... CONSMAC ka yɔrɔba siɲɛ kelen, o kɔfɛ, aw bɛ plati compactor, tamping rammer ani floor grinding suguyaw suma ɲɔgɔn na. O fɛɛrɛ bɛ dɛmɛ ka masin bɛn baara ma sanni ka sanni kɛ ka kɛɲɛ ni motɛri hakɛ dɔrɔn ye.
Ɲininkaliw
Lift thickness ɲuman ye mun ye plate compactor (plate compactor) kama?
A ka c’a la, kɔrɔtacogo ɲuman ye santimɛtɛrɛ 6-12 ye, walima santimɛtɛrɛ 15-30, daminɛbagaw ka labɛnni kama. Lifatan minnu ka bon, olu bɛ se ka fara ɲɔgɔn kan dɔrɔn ni fɛn, masin ani poroze ɲɛfɔli bɛ sira di o ma. Aw bɛ yɔrɔ wajibiyalen labato tuma bɛɛ fɔlɔ, barisa dugukolo suguya ni a nɔgɔ bɛ se ka dan nafama Changer.
Ne ka kan ka tɛmɛsira joli kɛ ni plati compacteur ye?
Daminɛ baara fanba mago bɛ tɛmɛsira 3-6 ɲɔgɔn na layɛrɛ kelen na, nka o hakɛ tigitigi bɛ bɔ fɛnw ni laɲini density de la. Ni dugukolo sanfɛla bɛ wuli hali bi sen kɔrɔ walima ni a bɛ sigili yelen jira, tɛmɛsira caman bɛ se ka kɛ. Ni a y’a daminɛ ka sɔgɔsɔgɔ walima ka nɔgɔ, a bɛ se ka kɛ ko a lamini bɛ ɲigi kojugu.
Frequency range jumɛn de bɛ kɛ ka caya yeelen plati compaction na?
Baarakɛyɔrɔ nafama ka teli ka kɛ 3000-6000 vpm lamini na yeelen-dafalen baara kama. Fɛrɛnkan ka caya, o kɔrɔ tɛ a yɛrɛma ko nɔ ɲuman bɛ sɔrɔ, bawo fɛnw jaabi, plati girinya, ani kɔrɔtacogo fana nafa ka bon. Setting min ka fisa, o ye min bɛ densité uniforme (dansi kelen) Bɔ k’a sɔrɔ surface tiɲɛni ma Kɛ.
Yala plati compacteur bɛ se ka kɛ bɔgɔbɔgɔ kan wa?
A bɛ se ka kɛ bɔgɔ ɲagaminen dɔw kan, nka a ka c’a la, bɔgɔ saniyalen ka fisa ni tamping rammer ye. Bɔgɔ bɛ ɲɔgɔn sɔrɔ wa a tɛ jaabi ɲuman di plati yɛrɛyɛrɛ dɔrɔn ma. Ni bɔgɔ nɔrɔlen don walima ni plastiki don, aw bɛ yɔrɔ fitini dɔ sɛgɛsɛgɛ fɔlɔ ka sɔrɔ ka a lajɛ ni a sirilen don walima ni a bɛ pɔnpe.
Ne bɛ se k’a dɔn cogo di ni compaction ka ɲi?
A ka c’a la, sɔgɔli ɲuman bɛ kɛ i n’a fɔ a jɔlen don sen kɔrɔ, a bɛ yɔrɔ lamagacogo fitinin jira, wa a bɛ jɔli taabolo nata dɛmɛ k’a sɔrɔ a ma kɛ ni jirisun ye min tɛ ye. Porozɛ fɔlɔw kan, density testing ye sariya lakika ye. Ni layini ma se ka cogoya minɛ walima ni a sigilen don sirako kɔfɛ, a mago bɛ baara wɛrɛw la.
