- Bololabaarakɛcogo bɛ sɔn ka kɛ yɔrɔ misɛnninw na, nka a man teli ka kɛ sugandi ɲuman ye density kɔrɔsilen na.
- Tamping rammer bɛ se ka kɛ kosɛbɛ bɔgɔdagaw la, kɔkannafɛnw na, ani dakunw sɔgɔli la, yɔrɔ minnu na plati sɔrɔli dan ye.
- Compaction quality nafa ka bon bawo density (dansi) dafalen tɛ dɔ fara sigili farati kan, ka jogindaw tiɲɛni, ani dilan musaka nataw.
- Sugandili ka kan ka da dugukolo suguya kan, kɔrɔtacogo bonya, doncogo bonya, ani density laɲini, a man kan ka kɛ delina ye.
- Baarakɛlaw fɛ, nafa belebele tɛ teliya dɔrɔn ye, nka segin-ka-bɔnye ani baara seginni dɔgɔyali.
Tamping rammer baarakɛcogo bɛ faamuya ka ɲɛ ni compaction control ye, a tɛ kɛ masin hakɛ dɔrɔn ye, bawo dugukolo density laɲiniw bɛ ɲɛfɔ tuma caman na ni sariyaw ye i n’a fɔ ASTM D698 ani ASTM D1557, minnu bɛ laboratuwari compaction fɛɛrɛw ɲɛfɔ minnu bɛ kɛ ka foro baara jateminɛ. Foro siratigɛ la, masin min bɛ se ka gosili kɛcogo basigilenw di yɔrɔw la minnu sirilen don, a ka c’a la, o bɛ bololabaarakɛcogo gosi jogoɲumanya ni baarakɛlaw ka baarakɛcogo ɲuman bɛɛ kan. Ni aw bɛ ka ɲɔgɔn sanga tamping rammer ye baara kɛ ni bololabaara ye, aw bɛ a lajɛ fana a bɛ bɛn cogo min na platiw (plate compacteurs) minnu bɛ kɛ ka ɲɛsin yɔrɔbaw ma ani bɛton tigɛlanw ka ɲɛsin siraba dilancogo baarakɛcogo ma min bɛ tali kɛ o la. Ɲininkali jɔnjɔn tɛ ko bololabaara bɛ Se ka Kɛ, nka n’a bɛ Se ka Se a hakɛ wajibiyalen ma ni dannaya ye k’a sɔrɔ a ma waati tɛmɛnen, sɛgɛn, ani ɲɔgɔndanbaliya.
Mun na Tamping Rammer bɛ Manuel Compaction Gosi Baarakɛyɔrɔ cogoya lakikaw la
Tamping rammer bɛ se sɔrɔ bawo impact compaction bɛ se ka kunbɛn ka tɛmɛ bolo fanga kan, kɛrɛnkɛrɛnnenya la ni baarakɛyɔrɔ ka dɔgɔn walima ni fasa ka kan ka jɔ lift finmanw kɔnɔ. Bololabaarakɛlaw ka ɲɔgɔnkanu bɛ bɔ kosɛbɛ baarakɛla fanga, a ka fɔcogo ani a muɲuli la, o de b’a to a nɔfɛkow bɛ ɲɔgɔn ta baarakɛlaw ni baara kelen kɔnɔ. Rammer bɛ fanga min lase dugukolo ma, o bɛ kɛ cogo kelen na, o la, kurun kɔnɔ baarakɛlaw bɛ se k’u sinsin a bilali kan, ka ji hakɛ kɔlɔsi, ani ka a kɔrɔta a janya la sanni u k’a ɲini ka bololabaarakɛlaw ka sɔgɔsɔgɔninjɛ min tɛ kelen ye, o musaka bɔ.
O nafa bɛ ye ka caya nafamayɔrɔw la, siraba lamini na, ani jusigilanw kɛrɛfɛ. Gɛlɛya min bɛ bololabaara la, o tɛ fanga dɔgɔyali dɔrɔn ye; o fana ye sebaliya ye k’o fanga mara baarakɛwaati dafalen kɔnɔ. Sɛgɛn bɛ o nɔ Changé, wa a ka ca a la, yɔrɔ nɔgɔlenw bɛ bɔ yɔrɔ minnu na baarakɛla ma se ka se walima ka segin ka gosili caman kɛ. Tamping rammer, o ni o tɛ kelen ye, o dabɔra ka segin-ka-bɔnye kɛ ni fɛn caman ye, o min b’a to a bɛ bɛn kosɛbɛ dugukolo jɛlenw ni dugukolo tilancɛ jɛlenw sirili ma yɔrɔ datugulenw na.
| Compaction Fɛɛrɛ | Baarakɛcogo ɲuman min bɛ kɛ cogoya la | Barika | Dantigɛli | Densité Contrôle (Densité Contrôle) baarakɛcogo ɲuman |
|---|---|---|---|---|
| Bololabaarakɛcogo | Patch misɛnninw kosɛbɛ, dilancogo nɔgɔmanw | Minɛn musaka tɛ, sigicogo nɔgɔman | Segin-ka-bɔnye dɔgɔyali, sɛgɛnba | Faantan fo ka se a danma ma |
| Tamping rammer ye | Kɔlɔnw, dakunw, kɔkannafɛnw, yɔrɔ datugulenw | Kɔnɔnafili fanga min ka bon, wale basigilen | A tɛ baara kɛ kosɛbɛ yɔrɔw la minnu ka bon ni granulaire ye | Koɲuman fo ka se ɲumanba ma |
| Plate compacteur (Dɔgɔtɔrɔso min bɛ kɛ ni plati) ye | Yɔrɔ fla belebelebaw, u dawolo ye granulaire ye | Dafalen teliya la yɔrɔw kan minnu ka bon | A tɛ baara kɛ kosɛbɛ yɔrɔ fitininw na | A ka ɲi yɔrɔ kelenw na |
Tablo min bɛ sanfɛ, o bɛ sariya jɔnjɔn jira, baarakɛlaw bɛ baara kɛ ni min ye yɔrɔ la: baarakɛminɛn min bɛ bɛn jateminɛ ni dugukolo cogoya ma, o sugandi. Tamping rammer tɛ diɲɛ bɛɛ ka fɛn ye min bɛ se ka kɛ compaction minɛnw bɛɛ nɔnabila ye, nka a bɛ se ka da a kan kosɛbɛ ka tɛmɛ bolola fɛɛrɛw kan ni sɔrɔli dɔgɔyara ani ni jogoɲumanya wajibiyalenw gɛlɛyara. Ni broad pavement prep, crew caman bɛ wuli ka taa a plati compacteur (plate compacteur) ye , o kɔfɛ, aw bɛ baara kɛ ni rammer ye ka ɲɛsin bɔgɔdaga dakunw ma ani utility cut zones ma.
Tamping Rammer vs Manual Compaction: Jatew kɔrɔ ye min ye
Kɔrɔbɔli jogo bɛ suman ni density, ji cogoya ani consistency ye, wa o kɔlɔlɔw dantigɛli ka gɛlɛn ni bololabaarakɛminɛnw dɔrɔn ye. Standard Proctor sɛgɛsɛgɛli ASTM D698 kɔrɔ ani Modified Proctor sɛgɛsɛgɛli ASTM D1557 kɔrɔ, olu ye hali bi dantigɛliw ye minnu bɛ kɛ tuma bɛɛ walasa ka foro sɔgɔli baarakɛcogo suma ɲɔgɔn na. ASTM D698 bɛ baara kɛ ni cɛsiri fɛɛrɛ jɔnjɔn ye, k’a sɔrɔ ASTM D1557 bɛ baara kɛ ni cɛsiri jɛlen ye min ka bon kosɛbɛ, wa a ka c’a la, a bɛ tali kɛ baara gɛlɛnw na. Foro la, a ka c’a la, baarakɛlaw b’u laɲini ka laboratuwari jalen hakɛ cayalenba kɛmɛsarada la sanni u k’u jigi da ɲɛnayeli jateminɛ kan.
O de ye bololabaarakɛlaw ka barikantanya koloma ye: baarakɛla tɛ ni jaabi tilennen ye. Aw bɛ se k’a ye ko dugukolo jɔlen don, nka ni density verification tɛ, a nɔ bɛ se ka kɛ hali bi spec jukɔrɔ. Nafamafɛnw seginni na, a ka c’a la, ɲɔgɔndan jugu bɛ jira kɔfɛ i n’a fɔ sigili, kari, walima yɔrɔ min degunna sanji ni siraba doni kɔfɛ. Tamping rammer bɛ dɔ bɔ o farati la, a kɛtɔ ka taabolo kɛ ka ɲɛ ka bɔ wuli la ka taa wuli la.
| Metiriki | Bololabaarakɛcogo | Tamping Rammer ye baara kɛ | Mun na a nafa ka bon |
|---|---|---|---|
| Segin-ka-bɔnye kɛli | Baarakɛla min bɛ a bolo | Masina min bɛ kɔrɔsi | Density (density) min bɛ ɲɔgɔn ta ka tɛmɛ |
| Datugulan yɔrɔ sirilen na | Fɛ́gɛn | Jamanjan | Trench ni edge sɔrɔli ka fisa |
| Sɛgɛn nɔ min bɛ mɔgɔ la | Jamanjan | Dɔgɔya fo ka se a danma ma | Less quality drift waati tɛmɛnen kɔfɛ |
| Farati bɛ baara kɛ kokura | Sanfɛ | Ka lajigin | Segin-ka-bɔnye minnu bɛ tali kɛ sigikafɔ la, olu dɔgɔyara |
| Benchmarking fɛɛrɛ | A ka c’a la, a si tɛ yen | A bɛ se ka bɛn ASTM D698 walima D1557 laɲiniw ma | A bɛ jogoɲumanya kɔlɔsili ɲɛ |
Ameriki jamana siraba ɲɛmɔgɔso ka fɔ la, ɲɔgɔndanbaliya bɛ kɛ sababu ye ka siraba ni bɔgɔdaga sigili gɛlɛyaw lase mɔgɔw ma, o de y’a to foro kɔlɔsili nafa ka bon i n’a fɔ masinw sugandili. Aw bɛ se ka FHWA ka laadilikanw lajɛ siraba ni dugukoloko baarakɛcogo kan FHWA ka dugukoloko foro baarakɛcogo minɛnw . Baarakɛlaw fɛ, kalan nafama ka nɔgɔn: tamping rammer nafa ka bon bawo a bɛ dɛmɛ ka baara dɔ sɛmɛntiya min bɛ kɛ ni hakili ye, ka kɛ baara ye min bɛ se ka segin-ka-bɔ.
Yɔrɔ min na bololabaarakɛlaw ka dugukolo sɔgɔli bɛ se ka kɛ hali bi
Bololabaarakɛyɔrɔ bɛ yɔrɔ la hali bi ni dilan yɔrɔ ka dɔgɔ, ni dondaw ka gɛlɛn, walima ni minɛnw baara tɛna ɲɛ. Misali la, ni yɔrɔ fitinin dɔ bɛ pipe wulilan lamini, ni sanfɛla min man dun kosɛbɛ, walima ni i magara laban na da nɔgɔlen dɔ kɛrɛfɛ, o tɛ se ka kɛ sababu ye ka na ni minɛnw ye minnu bɛ baara kɛ ni fanga ye. O ko suguw la, laɲini tɛ kɛ ka tɛmɛn fɛn bɛɛ kan, nka a bɛ kɛ ka sigida latilenni ye.
Nka, bololabaarakɛlaw ka fɛnw sɔgɔli bɛ dabila yɔrɔ min na, o dakun bɛ se joona ka tɛmɛ kurunba kɔnɔ baarakɛla caman b’a miiri cogo min na. Ni fasa juguya bonyalen don, ni bɔgɔdaga janyalen don, walima ni porozɛ in ye siraba doni tali daminɛ, bololabaara bɛ kɛ baarakɛlaw ka buteli ye. Farati tɛ ɲɛtaa dɔɔnin dɔrɔn ye; o fana ye densité inconsistente ye dilan senna-tɛgɛrɛ fan bɛɛ fɛ. O de y’a to baarakɛlaw caman bɛ bololabaara mara walasa ka yɔrɔw latilen ani ka baara kɛ ni tamping rammer ye walasa ka compaction cycle yɛrɛ kɛ.
- Aw bɛ bololabaara kɛ ni magalifɛn fitininw dɔrɔn ye, minnu farati ka dɔgɔn.
- Aw bɛ wuli ka taa tamping rammer la ni yɔrɔ ka dɔgɔn, ni a ka dun, walima ni a bɛ se ka doni ta.
- Aw bɛ baara kɛ ni plati compacteur ye yɔrɔ dafalenw kan minnu ye granulaire ye, yɔrɔ minnu na datugucogo nafa ka bon ka tɛmɛ impact kan.
- Aw bɛ density sɛgɛsɛgɛ tuma o tuma ni baara bɛ nɔ bila siraba, slabs, walima utilité sɔrɔyɔrɔ nataw la.
Ni aw ka baarakɛcogo fana bɛ yɔrɔ saniya ni yɔrɔ labɛnni na, pairing compaction with ɲagamikɛlaw ka ɲɛsin matériel prep ani duguma sɔgɔlanw sabu finiko latilenni bɛ se ka dɔ bɔ baarakɛbaliya waati la taabolow ni ɲɔgɔn cɛ. O kun ye ka minɛnw bɛn baara kɛcogo dafalen ma, a tɛ kɛ compaction moment dɔrɔn ye.
Dugukolo suguya, a kɔrɔtacogo, ani mun na Rammer ka baarakɛcogo bɛ Changé
Dugukolo kɛcogo bɛ jaabi Changer ka tɛmɛ daminɛbaga caman ka faamuyali kan. Dugukolo minnu bɛ ɲɔgɔn kan i n’a fɔ bɔgɔmugu walima bɔgɔ falen bɛ jaabi ɲuman di impact compaction ma barisa rammer ka gosili segin-segin bɛ dɛmɛ ka fɛnɲɛnamafagalanw labɛn kokura ani ka fiɲɛ gɛn. Dugukolo granulaire minnu jibɔyɔrɔ ka nɔgɔn, olu ka teli ka nafa caman sɔrɔ minɛnw na minnu sinsinnen bɛ yɛrɛyɛrɛli kan, kɛrɛnkɛrɛnnenya la yɔrɔ dafalenw na. O de y’a to tamping rammer bɛ se ka tɛmɛ manual compaction kan kosɛbɛ trench backfill la hali bi a tɛ baara kɛ kosɛbɛ ka tɛmɛ plate kan cɛncɛn basigilen kan.
Kɔrɔta janya nafa ka bon o kun kelen de la. Ni layini ka bon kojugu, bololabaarakɛlaw ka tamping walima masin fitinin si tɛ se ka a juguman bɛɛ lajɛlen minɛ ka ɲɛ. Foro kɛcogo ɲuman ye ka fasa bila lifatanw na minnu bɛ se ka ɲɛnabɔ ani ka lifatan kelen-kelen bɛɛ lajɛlen kɛ ka sɔrɔ ka nata fara a kan. Nin yɔrɔ in de la, fɛn dɔ b’a nafa jira: a bɛ baarakɛlaw dɛmɛ ka fɛnw kɔrɔtacogo finmanw kololi mara, minnu bɛ se ka kɔrɔsi sanni u k’a ɲini ka density wajibiya ka don layɛrɛ belebeleba dɔ kɔnɔ.
| Cogo | Bololabaarakɛcogo | Tamping Rammer ye baara kɛ | Waleya min bɛ ladilikan di |
|---|---|---|---|
| Kɔlɔn min ka surun kosɛbɛ | A bɛ se ka kɛ nka a bɛ kɛ dɔɔnin dɔɔnin | A ka fisa | Aw bɛ baara kɛ ni rammer ye lifatan finmanw kɔnɔ |
| Backfill min bɛ ɲɔgɔn sɔrɔ | Baarakɛcogo ɲuman dɔgɔya | Baara kɛcogo barikama | Aw bɛ jisuma ni a kɔrɔtacogo kɔrɔta |
| Da wulilen basigilen granulaire | Baarakɛbaliya | Nafa bɛ a la dakunw dɔrɔn de la | Aw bɛ baara kɛ ni plati compacteur ye |
| Patɔrɔn misɛnninw dilancogo | A bɛ Sɔn a ma | Wajibi tɛ | Sugandili ka da laɲini density ni waati kan |
Ji hakɛ ye fɛn wɛrɛ ye min bɛ fɛn caman sɛmɛntiya. ASTM D1557 ani foro taabolo minnu bɛ tali kɛ o la, olu bɛ baarakɛlaw hakili jigin ko density tɔnɔ bɛ bɔ dugukolo ka kɛ a nɛnɛ cogoya ɲuman kɛrɛfɛ. Jalen kojugu ani a fɛnɲɛnamafagalanw bɛ se ka labɛn kokura; ji bɛ jigin kojugu ani dugukolo bɛ gɛlɛya ka denso. Tamping rammer tɛ se ka jisuma kunbɛncogo jugu labɛn, nka a bɛ se ka jisuma kunbɛncogo ɲuman kɛ ka ɲɛ kosɛbɛ.
Baarakɛyɔrɔ baarakɛcogo ɲuman: Baara, baara seginni ani lakana
A ka c’a la, tamping rammer bɛ dɔ bɔ baara musaka bɛɛ lajɛlen na bawo a bɛ baarakɛwaatiw tigɛ ani ka weleli seginni cogoya dɔgɔya. Bololabaarakɛcogo bɛ i n’a fɔ a sɔngɔ man gɛlɛn a daminɛ na bawo a bɛ baara kɛ ni bololabaara ye, nka musaka dogolen bɛ bɔ a dilanni na dɔɔni dɔɔni, sɛgɛn ka caya, ani nɔ minnu tɛ bɛn ɲɔgɔn ma, n’a sɔrɔla olu ka kan ka baara kɛ kokura. Kontrakɛlaw ka sɔrɔko la, a ka c’a la, baara seginni musaka ka bon ka tɛmɛ baara fɔlɔ kan bawo a bɛ ɲɔgɔndan tiɲɛ ani ka jago nata bila kɔfɛ.
Lakanali fana nafa ka bon. Boloci bɛ dusu don mɔgɔ kɔnɔ u ka jɔ cogo gɛlɛn na, ka segin-ka-bɔnye kɛ, ani ka u cɛsiri kojugu, kɛrɛnkɛrɛnnenya la ni baarakɛlaw bɛ ka u yɛrɛ minɛ waati jan kɔnɔ bɔgɔdaga kɔnɔ walima da kɛrɛfɛ. Rammer min bɛ baara kɛ ni fanga ye, o tɛ farati ban, nka a bɛ baara wuli ka bɔ bolola fanga saniyalen na ka taa masin minɛcogo kɔrɔsilen na. O bɛ se ka dɔ bɔ degun joginw na ani ka baara kɛcogo ɲɛ ni kurun kɔnɔ baarakɛlaw dege ka ɲɛ ani ni minɛnw ladonna.
Baarakɛlaw fɛ minnu bɛ siraw labɛncogo, fɛnw labɛnni, ani sirada la baara ɲɛnabɔ, baarakɛcogo fili min ka teli ka kɛ, o ye ka bololabaara bɛ kɛ teliya la cogo min na, o dɔgɔya. Ni kurunba kɔnɔ baarakɛlaw ka kan ka baji caman kɛ ɲɔgɔn na, bololabaarakɛcogo bɛ dabila ka kɛ sugandi “nɔgɔlen” ye. KELEN tamping rammer ye bɛ kɛ baarakɛminɛn ye min bɛ se ka kɛ kosɛbɛ bawo a bɛ baara waati ni jogo caman ɲɔgɔnna bɛɛ degun ka kɛ taabolo ye min bɛ se ka ɲɛnabɔ.
Sugandili kɛcogo Rammer ni Manual Compaction cɛ
Sugandili ɲuman bɛ bɔ fɛn naani na minnu bɛ ɲɔgɔn falen: doncogo bonya, dugukolo suguya, wulicogo juguya, ani jogoɲini laɲini. Ni yɔrɔ ka bon ani ka kɛ fla ye, masin wɛrɛ bɛ se ka fisaya. Ni yɔrɔ ka dɔgɔn nka a ka dun, a ka c’a la, tamping rammer de ye jaabi ɲuman ye. Ni yɔrɔ ka dɔgɔn ani ni doni wajibiyalen ka dɔgɔn, bololabaara bɛ se ka sɔn hali bi. O fili ye ka sugandili kɛ ni delina ye sanni ka kɛ ni yɔrɔ cogoya ye.
- Baarakɛyɔrɔ bonya ni dondaw gɛlɛyaw suman.
- Aw bɛ dugukolo suguya ni ji hakɛ makɔnɔnen dɔn.
- Aw bɛ density walima compaction standard wajibiyalen dafa.
- Baarakɛminɛn min bɛ se ka segin-ka-bɔnye sɔrɔ ni segin-ka-bɔnye dɔɔnin ye, o sugandi.
- Aw bɛ a sɛgɛsɛgɛ ani ka a sɛgɛsɛgɛ sani aw ka lifatan datugu.
Sannikɛlaw fɛ minnu bɛ minɛnw suma ɲɔgɔn na sirako walima bɛton finidoncogo la, tuma caman na, o desizɔn min bɛ kɛ ka fɛnw sɔgɔ, o bɛ bɛn baarakɛcogo caman ma. Baarakɛla dɔ bɛ se ka baara kɛ ni a plati compacteur (plate compacteur) ye basigiyɔrɔw kama, a tamping rammer ye ka ɲɛsin zone dantigɛlenw ma, ani a bɛton yɛrɛyɛrɛlan ka ɲɛsin bɛton kura sabatili ma. O kun ye ka masin in bɛn a fɛn dilannen ni a jateminɛcogo ma, i kana baarakɛminɛn kelen wajibiya ka baara bɛɛ kɛ.
Ladonni ni baarakɛcogo kololi bɛ nɔ bila diɲɛ kɔnɔko lakikaw la
Hali tamper ɲuman tɛ baara kɛ ka ɲɛ ni ladonni ma kɛ. Fiɲɛ filɛriw, sɛnɛfɛnw cogoya, sanbara doncogo, ani yɛrɛyɛrɛ yɔrɔw bɛɛ bɛ nɔ bila bɔli ni dannaya la. Baarakɛlaw fana ka kan k’u janto gazi baaracogo jugu la, senw tɛ kelen ye, ani layini girinya kojugu, bawo masin tɛ se ka fɛɛrɛ jugu sara.
Tiɲɛ na, sɛgɛsɛgɛli ka kɔn a daminɛ ɲɛ, o ye ɲɔgɔndan jogo dɔ ye. Masina min yɔrɔw sɛgɛnnen don walima ni a ma sabati, o bɛ se ka baara kɛ hali bi, nka a foro cogoya bɛ se ka dɔgɔya. O nafa ka bon bawo compaction ye cumulative ye : tɛmɛsira barikama kelen bɛ se ka kɛ ko a tɛna kɛ kosɛbɛ, o bɛɛ n’a ta, a bɛ se ka yɔrɔ dɔ da min ka dɔgɔn, o min bɛ kɛ sababu ye ka sigiyɔrɔ sɔrɔ kɔfɛ. Baarakɛla min bɛ kolo, o bɛ tamper minɛ i n’a fɔ baarakɛminɛn ɲuman, a tɛ kɛ marifa ye min bɛ baara kɛ ni fanga ye dɔrɔn.
- Aw bɛ fɛnɲɛnamafagalan, fiɲɛbɔlan ani fɛnw sirilanw lajɛ sani baarakɛwaati bɛɛ ka kɛ.
- Aw bɛ sanbara ni bɔgɔdaga sɛgɛsɛgɛ ni u tiɲɛna walima ni u tiɲɛna.
- Aw bɛ ɲɔgɔn kɛ lifatan finmanw na sanni aw k’a ɲini ka juguya “kɛ” tɛmɛsira kelen kɔnɔ.
- Aw bɛ ji to a yɔrɔ la min bɛ se ka baara kɛ sani aw ka a daminɛ.
- Aw bɛ density sɛgɛsɛgɛ yɔrɔ min na baara bɛna doni ta walima ka siraba dɛmɛ.
Kuncɛli waleyali: Rammer vs Manuel Compaction
Kuncɛli min jɛlen don, o ye ko bololabaarakɛlaw ka fɛnw sɔgɔli ye kɔsegin fɛɛrɛ ye, k’a sɔrɔ tamping rammer ye sɛnɛfɛnw dilanni baarakɛminɛn ɲuman ye dugukolo baara fanba la minnu bɛ kɛ yɔrɔ danmadɔw la. Bololabaarakɛlaw ka tamping bɛ se ka gɛlɛya misɛnninw ɲɛnabɔ hali bi, nka a bɛ bɔ baarakɛla fanga la kojugu, wa a tɛ bɛn kojugu kɔkannafɛnw ni dilan baara juguw ma. Tamping rammer bɛ teliya, segin-ka-bɔnye ani jogoɲini ɲɛ, o de y’a to a ka fisa ni sugandili ye ka ɲɛsin trenching, edge zones, ani utility restoration ma.
Ni aw ka poroze kɔnɔ, ka segin-ka-bɔnye kɛ, ka patɔrɔnw dilan, walima ka sirada lamini, minɛnw latigɛ ka kan ka da density laɲini ni u sɔrɔli kan, a man kan ka da a kan ni baara bɛ i ko a ka dɔgɔ a ɲɛ fɔlɔ la. Baarakɛlaw minnu bɛ compaction step standardize, a ka c’a la, u bɛ callbacks dɔɔnin ye ani handoff saniyalen ka taa jago nata la. O de ye nafa lakika ye min bɛ bɔ bololabaarakɛcogo la ka taa baara la min sinsinnen bɛ masin kan.
Ni siraba ni bɛton baarakɛcogo ka bon, a ka c’a la, nafa ɲumanw bɛ sɔrɔ ni u ye fɛnw fara ɲɔgɔn kan minnu bɛ fɛnw sɔgɔ ni dɛmɛnan baarakɛminɛn ɲumanw ye, i n’a fɔ platiw (plate compacteurs) minnu bɛ kɛ , duguma sɔgɔlanw , ani bɛton tigɛlanw . Ni sen kelen-kelen bɛɛ bɛnna baara ma, foro jogo bɛ nɔgɔya ka kɔlɔsi, wa a bɛ nɔgɔya ka segin a kan.
Ɲininkaliw
Yala tamping rammer ka fisa tuma bɛɛ ni bolola compaction ye wa?
Ayi, tamping rammer ka fisa yɔrɔ datugulenw ni doni tali baara fanba la, nka bololabaara bɛ se ka sɔn hali bi touch-up misɛnninw na, farati man bon yɔrɔ minnu na, minɛnw tɛna baara kɛ yɔrɔ minnu na.
Dugukolo suguya jumɛnw bɛ nafa caman sɔrɔ tamping rammer fɛ?
Dugukolo minnu bɛ ɲɔgɔn kan ani minnu bɛ ɲɔgɔn cɛ tila, kɛrɛnkɛrɛnnenya la, bɔgɔdaga kɔfɛyɔrɔw ni u dafɛyɔrɔw, a ka c’a la, olu bɛ nafa caman lase u ma bawo nɔ bilali wale bɛ dɛmɛ ka density ɲɛ yɔrɔ datugulenw na.
Mun na bololabaara ka teli ka kɛ sababu ye ka sigi kɔfɛ?
Sabula a ka gɛlɛn ka fanga, datugucogo ani kɔrɔtacogo janya kɛ cogo kelen na dilan yɔrɔ bɛɛ la, o bɛ se ka yɔrɔ nɔgɔlenw to yen minnu bɛ sigi siraba walima ji caman caman cili kɔrɔ.
Sariya jumɛnw de bɛ kɛ ka caya walasa ka jateminɛ kɛ compaction jogo kan?
ASTM D698 ni ASTM D1557 ye Proctor compaction standards ye minnu bɛ baara kɛ kosɛbɛ walasa ka foro hakɛ suma ni laboratuwari ka jateminɛw ye.
Tuma jumɛn na ne ka kan ka plati compacteur sugandi sanni ka tamping rammer sugandi?
Aw bɛ plati compacteur sugandi ka ɲɛsin yɔrɔw ma minnu ka bon, minnu ka fla, minnu bɛ kɛ granulaire ye, yɔrɔ minnu na datugucogo nafa ka bon ka tɛmɛ wale kan min bɛ nɔba bila yɔrɔ fitinin na.
Ne bɛ se k’a dɔn cogo di ni dugukolo labɛnnen don ka sɔgɔsɔgɔ?
Dugukolo ka kan ka bila ji hakɛ bɛnnen na ani ka bila wuliyɔrɔ finmanw na walasa masin sugandilen ka se ka a bɛɛ lajɛlen sɔgɔ ka ɲɛ.
Misali belebeleba jumɛn bɛ kɛ kurunba kɔnɔ ni compaction ye?
Misali min ka teli ka kɛ, o ye ka baarakɛminɛn jugu sugandi yɔrɔ jateminɛ na, o kɔfɛ, k’a ɲini ka musaka wɛrɛw kɛ ni tɛmɛsira wɛrɛw ye sanni ka baarakɛcogo latilen.
